Logic Analyzer Adapter for 90 Pin LPDDR SDRAM memory device
Full Speed Debugging of Low Power, 0.8mm pitch LPDDR SDRAM memory
is made easier with LA-BGA-LPDDR-SDRAM-01 Logic Analyzer Adapter
BURNSVILLE, MN – November, 2009 – Ironwood Electronics’ LA-BGA-LPDDR-SDRAM-01 Logic Analyzer Adapter which allows high-speed operation simultaneously enabling memory device analysis used in PDAs, Cell phones, Digital cameras and MP3 players using a Logic Analyzer or an oscilloscope System. Ironwood Electronics have many years of expertise in developing high-speed interfaces for processors, peripheral IC’s and memory devices and approved development partner for both Agilent and Tektronix. Features of the LA-BGA-LPDDR-SDRAM-01 include shortest possible trace length for maximum speed, low inductance, low capacitance, fine pitch PCB design technology.
Ironwood’s LA-BGA-LPDDR-SDRAM-01 Logic Analyzer Adapter consists of three parts (BGA adapter, probe board and SMT base). SMT base is soldered to the target system board in place of BGA90, 0.8 pitch, 6×15 array, 8mmX13mm body using standard BGA soldering methods.
The probe board plugs into the SMT base and employs a PCB with power planes to deliver all data, address, control, and clock signals to AMP Mictor connectors. All signals from the BGA land pattern to the Mictor connector on this Logic Analyzer adapter has same length to ensure signal integrity. The LPDDR SDRAM device is surface mounted on to the male BGA adapter which will plug into the female BGA socket soldered to the probe board.
The LA-BGA-LPDDR-SDRAM-01 adapter is priced at $1,195 USD in quantities of 1-10 parts, with a lead-time of 5 days. The component parts are also available individually.
Catalog name: Ironwood Electronics Catalog 22
Company name: Ironwood Electronics
Contact info: Ila Pal
800 404 0204
Contact Information
Ironwood Electronics
11351 Rupp DriveSuite 400
Burnsville, MN, 55337
USA
tele: 952.229.8200
toll-free: 800.404.0204
fax: 952.229.8201
info@ironwoodelectronics.com
www.ironwoodelectronics.com
