EdgeCloud Small Cell Technology

---

Intel Architecture-based Cloud-RAN

---

Wireless Communications Cloud

---

8-bit PIC gives much more, for much, much less

Editor Chris. A. Ciufo gets the low-down from the DESIGN West conference.
At the recent DESIGN West conference in San Jose (formerly known as "ESC"), Microchip unleashed a new C-compiler strategy for its entire line-up, and a new low-cost 8-bit PIC MCU called the PIC16F178X. I got a chance to chat briefly with Greg Brown, Product Marketing Manager for the MCU8 division of Microchip. Click on the video to hear this on-target 3-minute interview.

Check out our 3-minute video interview with the product's Marketing Manager to learn more.

Extreme Low Power XLP 16-bit Development Board

http://www.microchip.com/xlp This video shows you all the features available on Microchips XLP 16-bit Development Board for extreme low power application design. The board supports development on PIC24F16KA102, PIC24FJ64GA102 and PIC24FJ64GB002 families of 16-bit PIC® MCUs featuring nanoWatt XLP technology.

Demo of eXtreme Low Power (XLP) MCUs

Today's applications must consume little power, and in extreme cases, last for up to 15-20 years, while running from a single battery. To enable applications like these, products with Microchip's nanoWatt XLP Technology offer the industry's lowest currents for Run and Sleep, where extreme low power applications spend 90%-99% of their time.

XLP 16-Bit Energy Harvesting Development Kit (Microchip Technology)

Solar Energy Harvesting using PIC® MCUs with XLP Technology

OpenVPX System Bandwidth: A comparison of 10Gb Ethernet Performance, Serial Rapid IO, and InfiniBand

This paper compares the bandwidth available to two common types of dataflow for systems based on the VITA 65 CEN16 central switched topology, using three different fabrics – Serial RapidIO (SRIO), 10 Gigabit Ethernet (10GbE), and Double Data Rate InfiniBand (DDR IB).

Xilinx Next Generation 28nm FPGA Technology Overview

Xilinx has chosen 28 nm high-metal gate (HKMG) high performance, low-power process technology and combined it with a new unified ASMBL™ architecture to create a new generation of FPGAs that offer lower power and higher performance. This white paper describes the challenges the semiconductor industry faces in addressing market requirements and describes how these can be solved with the right 28 nm process technology. The breakthrough combination of a high performance, low-power process with architectural innovations makes new 28 nm FPGAs well suited for power sensitive applications, bandwidth-intensive, and ultra-high end applications.

Maximize System Performance Using Xilinx Based AXI4 Interconnects

Key strategic design decisions made early in the development cycle often have far-reaching impact on the overall results achieved with the final design. Xilinx offers many product solutions with single and multiple on-chip processing elements, such as multiple MicroBlaze™ processors or ARM® Cortex™-A9 processors, DMA engines, communications, video, and DSP IP. Evaluation Kits and Targeted Design Platforms are available to serve both as sample system designs and as advanced FPGA development platforms for the underlying FPGA selection.

Xilinx 7 Series FPGAs: The Logical Advantage

Configurable logic tiles are the fundamental building blocks of all programmable digital electronic systems. Ever since Xilinx invented the FPGA in the 1980s, configurable logic, in the form of look-up tables and registers, has been an essential component of digital electronics systems across all markets and applications. This white paper describes the features of the configurable logic block in the 28 nm Xilinx 7 series FPGAs, highlighting advantages over previous Xilinx FPGAs and the benefits that these changes bring to the digital design engineer.

Lowering Power at 28 nm with Xilinx 7 Series FPGAs

This white paper describes several aspects of power related to the Xilinx® 28 nm 7 series FPGAs, including the TSMC 28 nm high-k metal gate (HKMG), high performance, low power (28 nm HPL or 28 HPL) process choice. The power benefits afforded by the 28 HPL process and its usefulness across Xilinx's full product offerings is described as well as the architectural innovations and features for power reduction across the dimensions of static power, dynamic power, and I/O power.

Getting Started with Artix-7 FPGAs

Conceived and designed for high-volume markets, Artix-7 FPGAs deliver the lowest power consumption and lowest cost in the 7 series. The family shares the same building blocks as the Kintex-7 and Virtex-7 FPGA architecture on the same 28 nm High Performance, Low Power (HPL) process, but transistor-level design choices enable the Artix-7 family to offer much lower power consumption while still meeting the performance needs of the target applications.

LTE-Advanced Signal Generation and Measurement Using SystemVue

LTE-Advanced is specified as part of Release 10 of the 3GPP specifications and is now approved for 4G IMT-Advanced. This application note introduces key LTE-Advanced techniques, as well as how to use the Agilent SystemVue W1918 LTE-Advanced library to generate various downlink (DL) orthogonal frequencydivision multiple access (OFDMA) and uplink (UL) clustered DFT-spread-OFDM (DFT-S-OFDM) signal sources with MIMO, and to measure closed-loop throughput.

This application note also introduces LTE-Advanced enhancements to the MIMO channel models, which are available as simulation model set called the W1715 SystemVue MIMO channel builder. This optional model set facilitates simulation-based MIMO over-the-air (OTA) testing using real, observed antenna patterns and standard MIMO fading models, and overcomes a key challenge for 8-layer MIMO system analysis and verification.