Pentek Introduces Slimmed Down 3.6 GS/sec Rugged Portable RF/IF Signal Recorder



  • Portable system for rugged environments such as ground vehicles, ships and aircraft
  • Ultra high sustained recording rates up to 4.8 GB/s
  • One or two channels of recording with up to 15.3 TB SSD storage to NTFS RAID
  • SystemFlow GUI control panel for fast, intuitive operation

Untitled-1Pentek, Inc., today announced a new recorder for the popular family of Talon® RF/IF signal recording and playback systems: the Model RTR 2729A rugged portable recorder, suitable for military and aerospace applications. Equipped with a 3.6 GHz 12-bit A/D converter, the RTR 2729A is capable of capturing an extremely wide band of signals in real time to disk. The user-programmable DDC (digital downconverter) allows the system to capture tunable IF signals with bandwidths up to 360 MHz continuously for over four hours. The RTR 2729A is the first portable recorder based on a new packaging scheme that boasts a smaller package, lighter weight and faster data rates.

The RTR 2729A uses a high-powered Pentek Virtex-7-based Onyx® software radio board with a PCIe Gen. 3 engine to provide data streaming for the high-speed A/D converter. Coupled with a high-performance PCIe Gen. 3 SATA III RAID controller, the RTR 2729A is capable of streaming contiguous data to disk in real time at rates up to 4.8 GB/sec, which is 2.4 times faster than the previous generation.

“Even though the RTR 2729A is 25% smaller than its predecessor, it delivers twice the storage capacity and more than double the recording speed. In addition, the DC power supply option makes it ideal for use in vehicles,” said Chris Tojeira, Recording Systems director for Pentek. “Getting an ultra-high performance recorder into the field right at the antenna has never been easier,” he added.

Ruggedized Construction

The RTR 2729A features a portable, lightweight housing measuring only 16.0” W x 6.9” D x 13.0” H, weighing just less than 30 pounds. This extremely rugged workstation is reinforced with shock absorbing rubber corners and an impact-resistant protective glass for its high resolution 17″ LCD monitor.

The hot-swappable Solid State Drive (SSD) array is available in 7.6 TB and 15.3 TB configurations and supports RAID levels 0, 1, 5, or 6. The SSDs are meticulously qualified by Pentek for optimum use in rugged and portable applications. The hot swappable solid-state drives exhibit high immunity to shock and vibration for full operation in ground vehicles, ships and aircraft.

Available I/O includes audio and VGA video, six USB 2.0 ports, two USB 3.0 ports and dual Gigabit Ethernet connections.

Ease of Operation

All Talon RTR Portable Recorders are built on a Windows 7 Professional workstation with an Intel Core i7 processor and provide both a GUI (graphical user interface) and API (Application Programmer’s Interface) to control the system. Systems are fully supported with Pentek’s SystemFlow® software for system control and turn-key operation. The software provides a GUI with point-and-click configuration management and can store custom configurations for single-click setup. The software also includes a virtual oscilloscope and signal analyzer to monitor signals before, during and after data collection.

Available Models, Evaluation Package and Pricing

Customers can select the recording I/O performance that best matches their recording system requirements. The Talon RTR Portable Recorders start at $74,995 USD. Delivery is 6-8 weeks ARO for all models.

SSD storage options include 7.6 TB and 15.3 TB capacities. New with the RTR 2729A is an 18 to 36 VDC power supply option for vehicle powered applications. Optional GPS time and position stamping captures critical signal information within each recording.

Pentek’s SystemFlow Simulator software package simulates the SystemFlow recording software found on all Talon recording systems. The free trial package is available for download at:  http://pentek.com/systemflow/systemflow.cfm?HID2=HP#SystemFlow_Simulator.


About Pentek

Pentek develops, manufactures and markets innovative DSP systems and recorders to original equipment manufacturers, distributors and value-added resellers. Pentek offers powerful VME, VPX, VXS, PMC, XMC, FMC, cPCI, PCI, PCIe and AMC boards for data acquisition, software radio and digital signal processing featuring Xilinx FPGAs, Texas Instruments C6000 DSPs, and Freescale G4 PowerPCs. Pentek’s I/O includes A/Ds, D/As, FPGAs, Serial FPDP, LVDS, RF converters and more. Pentek equips all products with high-performance I/O including gigabit serial interfaces and offers strong DSP software support.

Contact Information

Pentek

One Park Way
Upper Saddle River, NJ, 07458
USA

tele: 201-818-5900
fax: 201-818-5904
sales@pentek.com
www.pentek.com/

Share and Enjoy:
  • Digg
  • Sphinn
  • del.icio.us
  • Facebook
  • Mixx
  • Google
  • TwitThis