Technology, Philosophy, and Kitty Litter: An Interview with VITA’s Ray Alderman

By: Chris A. Ciufo, Editor, Embedded Systems Engineering

Chairman of the Board, Ray Alderman, presents a unique view of how embedded companies compete, thrive and die in the COTS market.

One never knows what Ray Alderman is going to say, only that it’s going to be interesting.  As Chairman of the Board of VITA (and former Executive Director), Ray is a colorful character. We caught up with him to discuss a recent white paper he wrote entitled: “RAW – How This Embedded Board and Systems Business Works.” We posed a series of questions to Ray about his musings; edited excerpts follow.

Chris “C2” Ciufo: Ray, you reference the Boston Consulting Group matrix that places companies in four quadrants, arguing that most of the companies in our embedded COTS industry are Low Volume (LV)/High Margin (HM) “Niche” players. The place not to be is the LV/LM “Graveyard”—right where technologies like ISA, S-100, Multibus and PCI Gen 2 are. But…PCI Express?

RayAldermanRay Alderman: I was careful to say “PCI Express Gen 2.” That’s because Gen 3 is on our doorstep, and then there will be Gen 4, and so on. Gen 2 will be EOL [end of life] before too long. The niche players in our market—all embedded boards, not just VME/VPX—rarely take leadership in mainstream technology. That position is reserved for the four companies that control 75% of the commercial embedded market segment, or $1.5 billion. They are ADLINK, Advantech, congatec, and Kontron: these guys get the inside track with technology innovators like Intel and Nvidia; they’ll have PCIe Gen 4 product ready to ship before the niche players even have the advanced specs. Everyone else has to find other ways to compete.

C2: You said that “in the history of this industry, no company has ever reached $1 billion in sales” because as the volumes go up, customers shift to contract manufacturers to lower their prices. Only three companies ever came close to the HV/LM quadrant. Who were they?

Ray: Advantech, Kontron and Motorola Computer Group (MCG). MCG, you’ll recall, was amalgamated with Force when sold by Solectron, and then morphed into Emerson Computer Group. MCG damn near ruled the VME business back then, but as my model points out—it was unsustainable. Advantech and Kontron are still around, although Kontron is going through some—ahem!—realignment right now. My model and predictions still hold true.

C2: What’s causing this growth-to-bust cycle in the embedded market? Not all markets experience this kind of bell curve: many keep rising beyond our event horizon.

Ray: Since about 1989, the companies that had to sell out or went out of business made one of two basic mistakes: (1) they entered into a commodity market and could not drive their costs down fast enough, or (2) they entered a niche market with a commodity strategy and the volumes never materialized.

I’ve been saying this for a while—it’s practically “Alderman’s Law”—but our military embedded board and system merchant market (all form factors) is about $1.2 billion. The cat litter market in the U.S. is about $1.8 billion, and their product is infinitely less complicated.

C2: Wait—are you really comparing kitty litter to embedded technology?

Ray: By contrast. Cat litter margins are low, volumes are high and they use a complex distribution system to get the litter to cats. Our margins are high, our volumes are low, and we deal direct with the users. The top three companies in the military segment—Abaco [formerly GE Intelligent Platforms], Curtiss-Wright Defense Solutions and Mercury—total up to about $750 million. They’re around $200 million each. They add intellectual value and enjoy high GPM [gross profit margin].

On the other hand, the commercial embedded board market for telecom, industrial, commercial and transportation totals to about $2.0 billion. Using kitty logic, the dry cat food market in the U.S. is about $3.8 billion. Their margins are low, volumes are high, and they use a complex distribution system. The players in the commercial board market have low margins, low volumes (compared to other segments), and sell directly to end users. It’s a terrible place to be. Kitty litter or cat food?

C2: What’s your advice?

Ray: I’m advocating for the military market, where margins are higher. About 61% of the military embedded board/system market is controlled by the three vendors, $750 million. The remaining $450 million (39%) is shared by many small niche vendors: nice, profitable niches. Several smaller companies do $30-50 million in this segment.  In contrast, only four companies control 75% of the commercial embedded boards market, or roughly $1.5 billion. That leaves a mere $500 million (25%) for all of the other smaller companies. Thus there are not many fairly large or profitable niches for these smaller guys—and not many of them do more than $10-15 million. Kitty litter, anyone?

C2: Can you offer some specific advice for board vendors?

Ray: There are only three values you can add to make money in these markets: manufacturing value, service value, and intellectual value. Adding intellectual value is where you add high-level technical skills that other companies do not have. Examples: high speed A-to-D boards where companies like Mercury and Pentek live. You can also add DSPs with unique IP inside. Again, Mercury and Pentek come to mind. In fact, Mercury (then Mercury Computer Systems) proved this model nicely when they invented the RACEway inter-board link and created ASICs to implement it. If you want to raise your GPM, this is how you do it.

In fact, Mercury is still doing it. They bought Echotek some years ago for their I/O boards and just recently bought three divisions of Microsemi. With this latest acquisition, they gain secure storage memories, crypto IP, and a bunch of RF capabilities to add to their existing RF portfolio. Today, RF technology is “magical” and Mercury will be able to charge accordingly for it to maximize their GPM.  Most of the embedded board military suppliers add their value to the market through intellectual value. It makes the most sense.

C2: Is the recipe for success merely targeting niche markets and adding intellectual value?

Ray: I’ll let you in on a little secret. The margin on boards is much higher than the margin on systems. It’s ironic, because every board guy seems to want to get into the systems business, and there have been lots of M&A [mergers and acquisitions] over the past several years. If you’re going to do systems, you’ve got to raise the price, especially if you’re selling air-cooled [convection] systems. Conduction-cooled systems command a higher price, but they’re harder to design.

You also need to choose the niche carefully, but that goes without saying. If you can add intellectual value to your niche—such as high performance GPGPU processing—you can command higher prices, whether at the board- or systems level.

There are only three ways to be successful in the embedded boards and systems business. Be first, be smarter, or cheat. Let me explain.

Being first is usually relegated to the big guys, like Abaco, Curtiss-Wright, or Mercury. They get access to the latest semiconductor technology, which is a fundamental driver in all of our markets. Examples here would be in-advance knowledge of Intel’s Kaby Lake follow-on to the Skylake Core i7 processor, or Nvidia’s plans for their next GPU. The smaller board vendors won’t get access, so they usually can’t be first.

One other thing, the big guys can also adapt a market to them. That is, they have enough influence that they can actually move an entire market. The smaller guys just have to find other ways.

But they can be smarter. Force Computer couldn’t (at the time) beat Motorola’s Computer Group because Motorola was inventing the 68xxx processors back then. So Force switched to the SPARC processor and built a successful business around it.  In effect, Force adapted to a market that was hungry for processing power—it didn’t have to be 68020 or 68040 processing power. [Editor’s note: in fact, the 68040 wasn’t successful because Motorola themselves introduced their PowerPC processor to the market, which was co-developed with IBM. The market moved away from the 68xxx CISC processor to the PPC60x RISC processor; the rest is “history.”]

C2: And lastly, how should companies “cheat” to win?

Ray: It’s hard to cheat in the open market, against big entrenched players. The best way to cheat is to fragment an existing market. Sun Tzu called this the “Divisional” strategy. Companies can create a niche such as by creating an open standard for your version of a board or system architecture. Creating a niche is like being smarter, but is marketing-based instead of being engineering-based.

At VITA/VSO, the policies and procedures allow any company, along with two other sponsors, to write a new standard without interference. There are countless examples of this within VITA, and many of these “fragmented niches” have become successful standards that we use today, including FMC, PMC, and XMC [mezzanine cards]. Older standards like Greenspring [mezzanine modules] were successful but now mostly obsolete. There are other new standards such as the three for rugged small form factors [VITA 73, 74, 75]. And the various OpenVPX profiles are other examples, such as new “Space VPX” and “Space VPX Lite”.

C2: Any last thoughts?

Ray: As Albert Einstein once said, “We cannot solve problems by using the same kind of thinking we used when we created them.” My point: look to new architectures beyond von Neumann’s architecture that the semiconductor guys keep forcing on us. Consider fiber interconnects as a way to get off the copper-trace technology curve. Create a niche—“cheat” if you have to. Just don’t end up following a kitty litter business strategy, else you’ll be taken out with the trash.

AMD on a Design Win Roll: GE and Samsung, Recent Examples

AMD is announcing several design wins per week as second-gen APUs show promise.

Note: AMD is a sponsor of this blog.

I follow many companies on Twitter, but lately it’s AMD that’s tweeting the loudest with weekly design wins. The company’s APUs—accelerated processing units—seem to be gaining traction in systems where PC functionality with game-like  graphics is critical. Core to both of these—pun intended!—is the x86 ISA with its PC compatibility and rich software ecosystem.

Here’s a look at two of AMD’s recent design wins, one for an R-Series and the other for the all-in-one G-Series APU.

Samsung’s “set-back box” adds high-res graphics and PC functions to their digital signage displays. (Courtesy: Samsung.)

Samsung’s “set-back box” adds high-res graphics and PC functions to their digital signage displays. (Courtesy: Samsung.)

Samsung Digital Signs on to AMD

In April Samsung and AMD announced that AMD’s second-gen embedded R-Series APU, previously codenamed “Bald Eagle” is powering Samsung’s latest set-back box (SBB) digital media players. I had no idea what a set-back box is until I looked it up.

Turns out it’s a slim embedded “pizza box” computer 310mm x 219mm x 32mm (12.2in x 8.6in x 1.3in) that’s inserted into the back (“set-back”) of a Samsung Large Format Display (LFD). These industrial-grade LFDs range in size from 32in to 82in and are used in digital signage applications.

Samsung LFDs (large format displays) use AMD R-Series APUs for flexible display features, like sending content to multiple displays via a network. (Courtesy: Samsung.)

Samsung LFDs (large format displays) use AMD R-Series APUs for flexible display features, like sending content to multiple displays via a network. (Courtesy: Samsung.)

What makes them so compelling is the reason they chose AMD’s R-Series APU. The SBB is a complete networked PC, alleviating the need for a separate box; they’re remotely controlled by Samsung’s MagicInfo software that allows up to 192 displays to be linked with same- or stitched-display information.

That is, one can build a video wall where the image is split across the displays—relying on AMD’s EyeFinity graphics feature—or content can be streamed across networked displays depending upon the retailer’s desired effect. Key to Samsung’s selling differentiation is remote management, RS232 control, and network-based self-diagnostics and active alert notification of problems.

Samsung is using the RX-425BB APU with integrated AMD Radeon R6 GPU. Per the datasheet, this version has a 35W TDP, 4 x86 cores and 6 GPU cores @ 654 MHz, is based on AMD’s latest “Steamroller” 64-bit CPU and Embedded Radeon E8860 discrete GPU. Each R-Series APU can drive four 3D, 4K, or HD displays (up to 4096 x 2160 pixels) while running DirectX 11.1, OpenGL 2.4 and AMD’s Mantle gaming SDK.

As neat as all of this is—it’s a super high-end embedded LAN-party “gaming” PC system, afterall—it’s the support for the latest HSA Foundation specs that makes the R-Series (and companion G-Series SOC) equally compelling for deeply embedded applications.  HSA allows mixed CPU and GPU computation which is especially useful in industrial control with its combination of general purpose, machine control, and display requirements.

GE Chooses AMD SOC for SFF

The second design win for AMD was back in February and it wasn’t broadcast widely: I stumbled across it while working on a sponsored piece for GE Intelligent Platforms (Disclosure: GE-IP is a sponsor of this blog.)

The AMD G-Series is now a monolithic, single-chip SOC that combines x86 CPU and Radeon graphics. (Courtesy: GE; YouTube.)

The AMD G-Series is now a monolithic, single-chip SOC that combines x86 CPU and Radeon graphics. (Courtesy: GE; YouTube.)

Used in a rugged, COM Express industrial controller, the AMD G-Series SOC met GE’s needs for low power and all-in-one processing, said Tommy Swigart, Global Product Manager at GE Intelligent Platforms. The “Jaguar” core in the SOC can sip as little as 5W TDP, yet still offers 3x PCIe, 2x GigE, 4x serial, plus HD audio and video, 10 USB (including 2x USB 3.0) and 2 SATA interfaces. What a Swiss Army knife of capability it is.

GE chose AMD’s G-Series APU for a rugged COM Express module for use in GE’s Industrial Internet. (Courtesy: GE Intelligent Platforms, YouTube.)

GE chose AMD’s G-Series APU for a rugged COM Express module for use in GE’s Industrial Internet. (Courtesy: GE Intelligent Platforms, YouTube.)

GE’s going all-in with the GE Industrial Internet, the company’s version of the IoT. Since the company is so diversified, GE can wring cost efficiencies for its customers by predicting aircraft maintenance, reducing energy in office HVAC installations, and interconnecting telemetry from locomotives to reduce track traffic and downtime. AMD’s G-Series APU brings computation, graphics, and bundles of I/O in a single-chip SOC—ideal for use in GE’s rugged SFF.

GE’s Industrial Internet runs on AMD’s G-Series APU. (Courtesy: GE; YouTube.)

GE’s Industrial Internet runs on AMD’s G-Series APU. (Courtesy: GE; YouTube.)