Calypto SLEC Product Family

Free Download

Download the latest issue of the Chip Design Magazine
and subscribe to receive future issues and the email newsletter

Calypto Design Systems

Calypto SLEC Product Family

The emergence of consumer electronics is causing a fundamental shift in Register Transfer Level (RTL) design methodologies. The race for time to market has resulted in the adoption and growth of higher level design creation methodologies. In particular, High Level Synthesis (HLS) directly from software models to hardware has become very popular. On the other end of the spectrum, the need to create faster and lower power RTL designs for consumer devices has led to design flows where designers use aggressive techniques for optimizing a given RTL design.

Calypto SLEC Product Family Datasheet

Contact Information

Calypto Design Systems

1731 Technology Drive
Suite 340
San Jose, CA, 95110
USA

tele: 408.477.8166
fax: 408.850.2321
info@calypto.com
www.calypto.com

Share and Enjoy:

This entry was posted on Wednesday, February 20th, 2013 at 12:26 pm and is filed under Datasheet.

Featured White Papers

Disruptive New Serial-Interface; Intelligent Memory Architecture Jumps 100/400GbE Performance Wall

Packet processor design teams face increasingly difficult challenges as they seek to provide their network equipment manufacturers with state-of-the-art devices. The interrelated system-level trade-offs include performance, pin count, and area, and are all ultimately limited by power consumption considerations. To successfully compete, network chip vendors must consider end-to-end solutions for system architects and developers. In turn, as OEMs introduce multi-terabit systems, they must aggregate multiple 100 Gbps ports on each line card or risk falling behind the performance curve.

MIL-STD-1553 IP

The MIL-STD-1553 serial data bus is widely used for control purposes in avionics, aircraft and space systems. Forty years since its release, 1553 is evolving from traditional integrated circuits (IC) to intellectual property (IP) cores integrated with Field Programmable Gate Array (FPGA) logic. The history of MIL-STD-1553, the advantages and requirements of 1553 IP cores compared to standard ICs, and IP core design best practices are discussed in this white paper.

Using FPGAs to Improve Embedded Designs

Field Programmable Gate Arrays (FPGAs) are semiconductor devices that are programmed after manufacturing to accomplish application specific functionality. FPGAs experienced rapid technology advancement in the 1990s, and today are found in a vast variety of products ranging from simple consumer items to highly complex military systems.

My RTL is an Alien!

FPGA-based prototyping is gaining popularity because it provides an economical way to functionally verify an ASIC design by creating a prototype that runs close to "at speed." FPGA-based prototypes also provide a great platform for early system software development. However, FPGA architectures include resources, building blocks, power circuitry, and clocks that are fundamentally different from those of an ASIC. With over 70% of today's ASICs and systems-on-chips (SoCs) being prototyped in an FPGA, designers are looking for ways to ease the creation of FPGA-based prototypes directly from the ASIC design source files.

An FPGA Approach to Implementing Time-Critical Functions in Multi-Sensor Mobile Designs

An FPGA Approach to Implementing Time-Critical Functions in Multi-Sensor Mobile Designs.

Designing with FPGAs for Embedded Computing Speed and Flexibility

Learn about FPGA-based system design for embedded computing I/O signal processing applications. Free your CPU by rapidly computing custom FFTs, SERDES, logic, and more. We discuss implementing co-processors, like Acromag Virtex-6 FPGA modules with high-speed PCIe/GbE interconnects, using IP cores and software development tools for higher performance and flexibility.

Kintex 7 FPGA family: High Performance DDR3 memory throughput achieved by optimization of the memory controller

Taking full advantage of the performances of the 7 Series FPGAs can be done by using the high speed memory controller from Barco Silex, which has been reworked to achieve the highest frequency and efficiency.

Upcoming Events

Solid

San Francisco, CA May 21-22, 2014
DAC 2014

San Francisco, CA June 1-5, 2014
International Microwave Symposium 2014 (IMS)

Tampa Bay, FL June 1-6, 2014
Sensors Expo and Conference

Rosemount, IL June 24-26, 2014
SEMICON West

San Francisco, CA July 8–10 , 2014

More Events >>

EECatalog Tech Videos

Collaboration is the key to chip innovation

In our third interview at the Design Automation Conference in Austin, Texas, John Blyler of Chip Design Magazine talks with Dennis Bibeau of Infotech about the importance of collaboration across all disciplines in achieving innovative chip design.

Code integration facilitates chip innovation

Chip Design's John Blyler interviews Cristian Amitroaie, CEO of AMIQ (http://www.amiq.ro) on the importance of code integration and the Eclipse platform At the Design Automation Conference in Austin, Texas.

Innovating with Statistical Analysis

In our first interview at the Design Automation Conference in Austin, Texas, John Blyler talks with Zhihong Lu of Proplus (http://www.proplussolutions.com/en/contact/) about the problems and potential of innovation in chip design through statistical analysis.

RTL Signoff turns competitive

In our fourth interview this week at the Design Automation Conference in Austin, Texas, EiC John Blyler of Chip Design talks with Mike Gianfagna, Vice President of Corporate Marketing at Atrenta, about the growing competition and advances in RTL Signoff.

GigOptix-40G DQPSK Demonstration

GigOptix demonstrates 40G DQPSK with revolutionary TFPS polymer modulator

Cost-Effective Millimeter Signal Analysis Approaches | Agilent Technologies

This video was provided by IEEE.tv's coverage of IMS 2012 in Montreal. Material was created by Ben Zarlingo and presented by Bruce Erickson of Agilent Technologies. http://www.agilent.com/find/sa

SDC Management and Verification: What's Missing?

Sarath Kirihennedige, Sr. Manager Product Engineering at Real Intent, speaks with Graham Bell about how design constraints (SDC) are currently developed, what are the problems with the current approach and what a complete Constraints management and verification solutions looks like.

Free Download

Calypto SLEC Product Family

Contact Information

Calypto Design Systems

EECatalog Tech Videos

Site Sponsors

Featured White Papers

Upcoming Events

EECatalog Tech Videos

Featured Solutions