Supported Xilinx FPGA/CPLDs: Virtex-6 LXT, Virtex-6 SXT, Virtex-6 HXT, Virtex-5 LX, Virtex-5 LXT, Virtex-5 SXT, Virtex-5 FXT, Virtex-5 TXT, Virtex-4 LX, Virtex-4 SX, Virtex-4 FX, Spartan-6 LX, Spartan-6 LXT, Spartan-3/3E/3A/3AN, Spartan-3A DSP

SoftJin Technologies provides Design IP cores, IP customization services and IP based system development services for various FPGA based applications, with special focus on the audio/ video and communication domain applications such as TV, set-top box, DVB modulator/ demodulator, personal video recording.

The key IPs in SoftJin’s portfolio includes:

• Audio/ Video Processing: PAL-NTSC-SECAM Encoder, HD Encoder, DVI/HDMI Transmitter, VGA Controller, Graphics LCD, Speech Codec, I2S, S/PDIF, 24-bit Audio Processor
• Image Processing: JPEG Encoder/Decoder, Edge Detection, Dilation/Erosion, Median Filter
• Digital Video Broadcasting: DVB-S2 compliant LDPC Codec, DVB-S2 compliant BCH codec, PSK modulator/ demodulator
• Memory Controller: SD Card controller, NAND Flash controller, Static RAM Controller
• Encryption/ Decryption: AES , MD5, SHA
• Interfaces: I2C, SPI, RS232, USB-FPGA host/peripheral interface, PS/2 interface
• DSP: FFT, DCT, FIR, Matrix multiplier, IEEE floating point add/sub/multiply

SoftJin offers the IP cores under source code (both RTL and C code) licensing as well as FPGA Netlist licensing targeted for particular FPGA device.

FEATURES & BENEFITS

• SoftJin provides IP customization services to achieve better speed and efficient resource utilization on a particular FPGA device by various techniques like usage of hard macros (multiplier/ DSP slices), architecture specific PLL/ clock manager configuration, tool flow specific annotation in RTL code as well as in configuration file and tuning of parameters for synthesis, P&R according to the target application.
• SoftJin provides system development services by reusing SoftJin’s or third party IPs. This includes system level design, HW-SW partitioning, co-simulation and co-verification, RTL development and verification, FPGA implementation, Schematic engineering, Layout engineering and prototype PCB manufacturing.
• SoftJin also provides system optimization services by virtual prototyping (SystemC), algorithmic optimization, performance/cost/ risk analysis at system level.

TECHNICAL SPECS

• PAL-NTSC-SECAM Encoder: Supports BT601/ BT656/ RGB/ YUV inputs and generates output video in NTSC(M)/ PAL(B,D,G,H,I)/ PAL (M)/ PAL(N)/ SECAM standards. Supports RGB/ YUV/ S-Video/Composite output video formats. It has programmable luma and chroma filters and luma delay.
• JPEG Encoder: Supports baseline ISO/IEC 10918-1 standard. It has 8×8 two dimensional fixed point DCT and configurable Huffman and Quantization table.
• DVB-S2 LDPC Decoder: Supports both normal (64800) and short (16400) frame lengths. It also supports all code rates (1/4, 1/3, 2/5, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10) and programmable iteration length.
• DVB-S2 BCH Decoder: It is compatible with all code and data rate and has provision for changing code rate dynamically. It supports both error and erasure decoding.
• SD Card Controller: It meets SD physical layer specification version 2.0. It supports standard SD card memory, and SDHC.

AVAILABILITY

Now

APPLICATION AREAS

Broadcast, Consumer, Data Processing and Storage, Wired Communcations, Wireless Communications

Contact Information

SoftJin Technologies Pvt. Ltd.

2900 Gordon Ave, Suite 100-11
Santa Clara , CA, 95051

tele: 408-773-1714
fax: 408-773-1714
sales@softjin.com
www.softjin.com