Supported Xilinx FPGA/CPLDs: Spartan-3/3E/3A/3AN, Spartan- 3A DSP

The X3 Family PCI Express cards are available on a standard half-height, single slot PCI Express plug-in card with a PCI Express interface or a 3U card with a cPCI interface, or XMC mezzanine module. Intelligent, Customizable I/ O, High Performance I/O & FPGA Core. Eliminate custom hardware by harnessing the power of PCI Express & Customizable FPGA.

All X3 family cards utilize the common bus interface to deliver high data throughput to the Host, along with the flexibility of user-customizable FPGA signal processing. Board specific analog or digital I/O flows directly into the user-configurable Spartan 3 logic device. The supplied stock logic functionality allows the board to be used out-of-the-box as high-speed I/O board in which the large onboard RAM is configured as a virtual FIFO, to increase the instantaneous load-carrying capacity of the board to eliminate data overruns/underruns during real-time streaming.

However, using the VHDL source code or MatLab board support package contained within the optional Framework Logic software package, you can readily customize the functionality of the FPGA to include real-time processing such as independent FIR & IIR filters on each channel, realtime FFT processing, ultra-fast feedback & control loops & much more. Use of MatLab/Simulink in conjunction with the supplied MatLab board support package opens an entirely new range of real-solution possibilities.

FEATURES & BENEFITS

• X3-10M – 8 simultaneous channels of 25 MSPS 16-bit A/D, and 1.8M FPGA with DSP
• X3-25M – (2) 105 MSPS A/Ds, (2) 50 MSPS D/As, Spartan 3A DSP 1.8M FPGA
• X3-A4D4 (4) 4 MSPS A/Ds, (4) 50 MSPS DACs and 1.8M FPGA with DSP
• X3-Servo PCI Express XMC Module – (12) 250 KSPS A/Ds, (12) 2MSPS DACs, 1.8M FPGA with DSP
• X3-DIO – LVDS or LVCMOS Digital IO and 1M FPGA with DSP
• X3-SD – 16 Channel, 216 KHz, 24-bit Analog Input
• X3-SDF PCI Express XMC Module, (4) 24-bit, Fast Sigma-Delta A/D <110 dB, 1M FPGA, 4 MB Memory
• X3-Servo – (12) 250 KSPS A/Ds, (12) 2MSPS DACs, 1.8M FPGA with DSP
• X3-Timing Precision Timing for Sample Rate Generation and Triggering Controls with GPS-disciplined and 1 PPM Reference Clocks

TECHNICAL SPECS

• Xilinx Spartan3A-DSP or Spartan 3 1-2M Gate FPGA Two 2MB SRAMsPCI Express with <150 MB/s data rates Analog and digital IO integrated with FPGA core Lower Overall Cost
• Industry-standard COTS works with any PCI Express system or host card Add DSP and customize features to meet unique requirements Data buffering supports high rates and large data sets for FFTsFast
• Industry-standard host bus eliminates custom hardware & achieves higher channel counts Improve performance with real-time signal processing
• Eliminate custom hardware & simplify system design using intelligent IO and PCI Express
• All cards are also readily installed into Innovative Integration’s eInstrument Embedded PC, SBC-ComEx Single-Board Computer, and Andale Data Loggers.

AVAILABILITY

Now!

APPLICATION AREAS

Aerospace/Defense, Broadcast, Industrial Automation, Medical Imaging, Motor Control, Wireless Communications

Contact Information

Innovative Integration

2390-A Ward Avenue
Simi Valley, CA, 93065
USA

tele: 805.578.4260
fax: 805.578.4225
sales@innovative-dsp.com
www.innovative-dsp.com