CoaXPress Helps Manufacturers Overcome Challenges of Integrating Machine Vision into the Industrial Internet of Things

According to market research, there will be nearly 26 billion devices on the Internet of Things by 2020.* While the consumer end of the IoT has been the primary focus of attention, the manufacturing subset of the IoT, known as the Industrial Internet of Things or the IIoT, will witness even more spectacular growth. Manufacturing companies are expected to spend $500 billion a year by 2020 on IIoT technology, and generate value of $15 trillion annually by 2030.

At its core, the IIoT is about the interconnection of intelligent devices that collect, scour and share data to find trends, patterns and anomalies to help businesses make better decisions. Companies are already benefitting from the IIoT through cost savings due to predictive maintenance, improved safety, and other operational efficiencies.

Data is king in the IIoT. However, you can’t measure what you can’t see or sense. This has given rise to a renewed need for increased and improved machine vision technologies, says Donal Waide, Director of Sales & Marketing for BitFlow, Inc., a manufacturer of frame grabbers used in machine vision technology.

“Data generated by cameras within an IIoT ecosystem is invaluable, if not absolutely essential, for successful connectivity and collaboration,” says Waide. “An IIoT device without a camera or sensor may someday soon be considered a simple tool.”

Waide gives the example of a connected camera on a packaging line. In addition to performing its traditional duty of reading barcodes to obtain product data, it will also evaluate barcode print quality to notify other machines to perform routine maintenance to barcode printers before codes fall below acceptable standards of readability.

The challenge is how to integrate machine vision in a system of hundreds, if not thousands, of connected IIoT devices. Waide suggests the answer is the widely adopted CoaXPress (CXP) camera-to-computer interface. First proposed seven years ago, CXP combines the traditional simplicity of 75 Ω coaxial cable with state of the art, high-speed serial data technology. The merging of these two features – inexpensive coaxial cable and “XPress” speed – provides a highly desirable solution for IIoT data transmission.

The backbone of the IIoT is the fast, reliable transfer of “Big Data” so it can be acted on by other machines. CoaXPress meets that challenge head-on by supporting bit rates up to 6.25 Gbit/s over a single coaxial cable from camera to frame grabber, meaning 2 megapixel images can be obtained at up to 300 frames-per-second. A low-speed uplink channel, operating at 20.833 Mbit/s from frame grabber to camera can be used for camera control or triggering, while a 24V power supply is also available over the cable to deliver up to 13W to the camera. For even higher speeds, links may be combined to provide multiples of the single coax bandwidth.

But it is not just the higher speeds that are attractive. Other key advantage is the use of longer, more flexible cabling. Cable lengths greater than 100 meters (328 feet) can be achieved without hubs, repeaters, or other intermediary. It is also possible to reuse existing coaxial cable when upgrading from an analog to a digital camera system, making CXP ideal for cost-effective retrofitting.

BitFlow recently introduced its Aon-CXP CoaXPress single-link frame grabber to address the IIoT and other machine vision markets. Affordable yet powerful, the Aon-CXP is optimized for use with the newest generation of smaller, cooler operating CXP single-link cameras popular in the IIoT. Mating a single-link CXP camera with the Aon-CXP provides the convenience of a GigE Vision or USB3 vision camera system, but is faster, less expensive and permits longer cable lengths. It also delivers a host of features missing from GigE Vision or USB3camera systems such as triggers, encoders, strobe, waveform generators, and quadrature encoder support. All of the hardware and software components of the BitFlow Aon-CXP capture system are sourced from one manufacturer, eliminating the hassles of systems built of blocks from different manufacturers.

Machine vision today is a reactive tool for identifying defective parts. In the IIoT, however, its impact will go beyond simply inspecting parts or guiding robots. Empowered by connectivity, machine vision will be used to extract data from images for drawing insights with statistical and data science techniques, and enable greater collaboration across entire supply chains in real time.

To learn more, please visit


About BitFlow

BitFlow has been developing reliable, high-performance Frame Grabbers for use in imaging applications since 1993. BitFlow is the leader in Camera Link frame grabbers, building the fastest frame grabbers in the world, with the highest camera/frame grabber densities, triggering performance, and price. With thousands of boards installed throughout the world, into hundreds of imaging applications, BitFlow is dedicated to using this knowledge and experience to provide customers with the best possible image acquisition and application development solutions. BitFlow, located in Woburn, MA, has distributors and resellers located all over the world including Asia, the Americas, and Europe. Visit our website at

Contact Information

BitFlow, Inc.

400 West Cummings Park Suite 5050
Woburn, MA, 01801

tele: 781-932-2900
fax: 781-932-2900