Supported Intel® Products: Intel® Core™2 Duo Processor

Compatible Operating Systems: Microsoft Windows 2003, MontaVista CGE 3.1 and 4.0, Wind River VxWorks 5.5.1 and 6.6

The Emerson Network Power CPCI7200 SBC uses the Intel® Core™2 Duo processor and Intel® E7520 chipset with Intel® 6300ESB I/O Controller Hub. The single-slot configuration is ideal for thermally constrained environments and includes dual Gigabit Ethernet interfaces and dual channel 3.2GB/s high speed, double data rate DDR2, for a combined maximum bandwidth of 6.4GB/s.

The low-power, high-performance CPCI7200 offers full hot swap compliance per PICMG® 2.1 and supports the PICMG 2.9 and PICMG 2.16 open specifications. In addition to the PICMG 2.16 variants, the CPCI7200 offers other value-added features including the PLX6466 PCI-to-PCI bridge (PPB) for universal CompactPCI system-slot or peripheral-slot functionality. It supports the IPMI specification for full board remote system and platform management, as well as baseboard management controller (BMC) and peripheral mode.

FEATURES

• 1.06 or 1.5 GHz Intel Core 2 Duo processor
• 533 or 667 MHz frontside bus
• Intel E7520 chipset + Intel® 6300ESB ICH, dual channel 3.2GB/s memory controller
• 2GB ECC-protected DDR2-400
• Dual on-board Gigabit Ethernet interfaces
• Full PICMG 2.1, R2.0 Hot Swap specification compliance
• One or two PCI mezzanine card (PMC) site
• Hard disk drive accessory kits optional
• Optional rear transition module in PICMG 2.16 and rear I/O variants
• PLX6466 PCI-to-PCI bridge technology

Contact Information

Emerson Network Power

2900 S. Diablo Way, Suite 190
Tempe, AZ, 85282
USA

toll-free: 800-759-1107
fax: 602-438-5720
EmbeddedComputingSales@emerson.com
emersonnetworkpower.com/embeddedcomputing/