Axiomtek’s iCON-1141 Hardened 10/100BASE-TX to 100BASE-FX Media Converters for Substation and Power Automation Complies with IEC61850 and IEEE1613



The iCON-1141 media converters feature Link Fault Pass-Through feature, redundant power, relay output alarm, rugged IP30 enclosure, and wide-operating temperature range, keeping your industrial applications running non-stop

Taipei, Taiwan, July 21, 2010- Axiomtek introduced iCON-1141 series of Fast Ethernet media converters that translate transmission signals from 100BASE-TX cable to 100BASE-FX fiber optic cable. With a wide operating temperature range from -40°C to +75°C, the IP30-rated iCON-1141 series meets NEMA TS1/2 standard for traffic control equipment, complied with the standard of IEC61850-3 and IEEE1613 for electric utility automation applications, and meets EN50121-4 safety standard for railway applications. To enhance system reliability, the device comes with Link Fault Pass-Through to help users quickly identify network errors, and offers redundant power and relay output warning alarm to help prevent damage and loss from power failure and port link failure. The rugged and intelligent iCON-1141 series is specially designed to provide reliable and stable 10/100BaseTX to 100BaseFX media conversion for electric utility automation applications, such as substation, wind power systems, hydro power plants, distributed energy resources and water control system, etc.

“Axiomtek’s iCON-1141 Fast Ethernet media converters allow you to connect twisted-pair network to optical-fiber network easily and cost-effectively. These stand-alone converters are designed to fit the emerging deployment needs of optical fiber network,” said Philip Wei, Product Manager of Applied Computer & Network Device Business Unit at Axiomtek. “To enhance system reliability, the iCON-1141 series offers Link Fault Pass Through feature, redundant power and relay output alarm. Additionally, this series applies high quality components with advantages of wide operating temperature range and long MTBF to keep your industrial applications running non-stop. Otherwise, the iCON-1141 series is complied with the standard of IEC61850-3, IEEE1613, and EN50121-4.”

Axiomtek’s iCON-1141 hardened media converters are available in all types of fiber cabling and connector types. The RJ-45 port on this unit provides auto-MDIX and auto-negotiation. The iCON-1141 series comes equipped with a wide voltage range from 12 to 48 VDC redundant power input via a terminal block or power jack, and is secured with Power Polarity Reverse and an Overload Current Resettable Fuse. For ease of maintenance, the iCON-1141 series features front-facing LED indicators for continues status reports on network speed, duplex media access control connection, and network traffic. To fit various application requirements, the device can be DIN-rail, panel, or rack mounted.

These RoHS compliant products are available now. For more product information, please visit our global website www.axiomtek.com or contact our sales representative at info@axiomtek.com.tw.

Advanced Features

  • Complies with IEC61850 EMC and environment requirement, and IEEE1613 standard for substation and power automation
  • Complies with EN50121-4 environmental requirement for railway applications
  • Complies with NEMA TS1 & TS2 environmental requirements for traffic control equipment
  • DIP switch configuration for “Link-Fault-Pass-Through”, link down alarm, speed, duplex mode
  • 768K bits buffer memory
  • 10/100Mbps-full/half-duplex, auto-negotiation, auto-MDI/MDIX
  • Full wire-speed forwarding rate
  • Alarms for power and port link failure by relay output
  • Redundant power inputs with terminal block and DC jack
  • -40°C to +75°C (-40°F to +167°F) operating temperature range
  • Hardened aluminum case
  • Supports DIN-rail, panel or rack mounting

About Axiomtek Co., Ltd.

Axiomtek Co., Ltd. is one of the world’s leading designers/manufacturers of PC-based industrial computer products. From its roots as a turnkey systems integrator specializing in data acquisition and control systems, Axiomtek has mirrored the PC evolution in various industries by shifting its focus toward the design and manufacture of PC-based industrial automation solutions.

Axiomtek was established since 1990. The company has 475 employees in headquarters and over 110 employees in subsidiaries including USA, China, and Europe. The company has appointed more than 60 distributor partners around the globe. Axiomtek offers IPC (Industrial PCs), ECP (Embedded Computing Platforms), Rugged Embedded System, (eBOX series), TPC (Touch Panel Computers), Medical Panel Computers, HMI (Human Machine Interface), Digital Signage & Displays, Industrial Networking  & Network Device, and NA (Network Appliances) product lines with more than 400 items.

 

Contact Information

AXIOMTEK

18138 Rowland St.
City of Industry, CA, 91748
USA

tele: 626-581-3232
toll-free: 1-888-GO-AXIOM
solutions@axiomtek.com
us.axiomtek.com

Share and Enjoy:
  • Digg
  • Sphinn
  • del.icio.us
  • Facebook
  • Mixx
  • Google
  • TwitThis