ITOX SB330-CRM Embedded Board Supports 2nd Generation Intel® Core™ Processors



EAST BRUNSWICK, NJ – May 23, 2011 – ITOX, a leading provider of embedded x86 products and the United States affiliate of DFI Inc., today launches the microATX form factor SB330-CRM scalable desktop platform offering higher processing performance, superior graphics display support, and evolutionary memory system and I/O interface improvements. This embedded board uses an Intel® Q67 chipset supporting the quad core Intel® Core™ i7-2600 and i5-2400 processors, and dual core i3-2120 processor featuring 32-nanometer process technology. The graphics and processor cores are integrated on a single monolithic die and provide Intel® HD graphics support for DVI-I and VGA display interfaces. The Intel® 32-nanometer architecture family provides higher performance at lower power than previous generation processors, and includes the first quad-core processor with an integrated graphics core. Performance is further increased through the introduction of Intel® Advanced Vector Extensions (AVX) to the instruction set, providing acceleration of complex audio, video, and image processing.

In addition, this new platform supports Intel® Hyper-Threading and improved Intel® Turbo Boost Technology, which enables each processor core to handle two instruction threads and dynamically increase the clock speed when all cores are not fully utilized. This provides increased performance over the previous generation platform for both multi-core and non-multi-core optimized application programs. The combination of Intel® Hyper-Threading, Intel® Turbo Boost improvements, and the new three-level cache subsystem insures higher performance at reduced power consumption across a broad-spectrum of embedded processing applications.

Support is provided for up to 32GB of DDR3 1066/1333 MHz dual-channel system memory, two Gigabit LAN controllers, DVI and VGA display interfaces, Intel® vPro™ features AMT 7.0, VT, TxT, and optional Trusted Platform Module (TPM 1.2). The integrated Intel® HD graphics engine supports six graphics execution units with dynamic turbo boost to accelerate video processing, and Intel® Clear Video Technology providing advanced imaging capability for Blu Ray° and other high definition video processing.

The SB330-CRM also supports Intel® HD audio with S/PDIF input/output interface, four Serial ATA ports with speed up to 3Gb/s, two Serial ATA ports with speed up to 6Gb/s, RAID 0, 1, 5, and 10 disk configuration, twelve USB 2.0 host controller ports, and one PCI Express x16 expansion slot (Gen 2), one PCI Express x4 expansion slot, and two PCI expansion slots.

This embedded microATX board is ideal for appli­cations requiring a stable revision-controlled platform such as industrial control automation, digital signage, kiosk, medical equipment, telecom, and gaming embedded applications.

SB330-CRM Features:

  • microATX form factor, 244mm x 244mm
  • Supports Intel® Core™ i7-2600, i5-2400, and i3-2120 processors
  • Intel® Q67 PCH platform controller hub
  • Supports Intel® vPro™ features AMT 7.0, VT, and TxT
  • Trusted Platform Module (TPM 1.2) option
  • Up to 32GB of DDR3 1066/1333 MHz dual-channel memory
  • DVI and VGA display interfaces
  • 2 Gigabit Ethernet LAN ports
  • 4 SATA ports (3Gb/s)
  • 2 SATA ports (6Gb/s)
  • RAID 0, 1, 5 & 10 disk configuration
  • 12 USB ports
  • 6 Serial COM ports (2 RS-232/422/484)
  • 1 PCI Express x16 expansion slot (Gen 2)
  • 1 PCI Express x4 expansion slot
  • 2 PCI expansion slots
  • Operating Temperature Range 0°C to 60°C

All product specifications are subject to change without notice.

Intel® and Core™ are registered trademarks of the Intel Corporation in the U.S. and other countries.

Product Availability
Board samples are available now.

For ordering information and OEM volume pricing, please contact ITOX at sales@itox.com or call 888-200-4869 (732-390-2815 Outside USA).

About ITOX Applied Computing
Headquartered in East Brunswick, New Jersey, ITOX Applied Computing (www.itox.com) is the United States affiliate of DFI, Inc. Founded in 1987, the company is recognized nationwide as a leading supplier of x86 embedded motherboards and SBCs for use in light industrial and special OEM environments including voice messaging, medical electronics, industrial control, security & surveillance, telecommunications, ATM/POS, digital signage, gaming and kiosk systems.  

As an independent ISO 9001:2008 registered firm, ITOX provides and supports both standard and custom-designed products ranging from ATX through Mini-ITX motherboards, small form factor SBCs, and COM modules. ITOX is committed to supporting customer requirements and continues to provide motherboards incorporating legacy ISA slots, along with PCI, PCI-X and PCI Express bus support.

DFI-ITOX is an Associate Member of the Intel® Embedded Alliance, a community of embedded developers and OEM solution providers.

Contact Information

ITOX Applied Computing

8 Elkins Road
East Brunswick, NJ, 08816
USA

tele: 732.390.2815
fax: 732.390.2817
sales@itox.com
www.itox.com

Share and Enjoy:
  • Digg
  • Sphinn
  • del.icio.us
  • Facebook
  • Mixx
  • Google
  • TwitThis
Extension Media websites place cookies on your device to give you the best user experience. By using our websites, you agree to placement of these cookies and to our Privacy Policy. Please click here to accept.