ITOX SB630-CRM ATX Embedded Motherboard Supports 2nd Generation Intel® CoreTM Processor

EAST BRUNSWICK, NJ – September 26, 2011 – ITOX, a leading provider of embedded x86 products and the United States affiliate of DFI® Inc., today announces the SB630-CRM, the first ATX motherboard in its Intel® Q67 product line. This ATX form factor board supports the 2nd generation Intel&reg Core™ i7-2600, i5-2400, and i3-2120 processors that feature 32-nanometer process technology providing higher performance at lower power than previous processors.

The Intel® HD Graphics 2000 engine integrated into these scalable desktop 2nd generation Intel® Core™ processors supports six graphics execution units with dynamic turbo boost to accelerate video processing, and Intel® Clear Video Technology providing advanced imaging capability for Blu Ray and other high definition video processing. Performance is further increased through the introduction of Intel® Advanced Vector Extensions (AVX) to the instruction set, providing acceleration of complex audio, video, and image processing. DVI and VGA graphics interface connectors provide dual independent display support up to 1,920 x 1,200 and 2,048 x 1,536 resolutions, respectively. An optional SDVO-LVDS daughterboard supports LVDS display up to 1600×1200 resolution and dimming control via hot keys.

In addition, this new platform supports Intel® Hyper-Threading and improved Intel® Turbo Boost Technology, which enables each processor core to handle two instruction threads and dynamically increase the clock speed when all cores are not fully utilized. This provides increased performance over the previous generation platform for both multi-core and non-multi-core optimized application programs. The combination of Intel® Hyper-Threading, Intel® Turbo Boost improvements, and the new three-level cache subsystem insures higher performance at reduced power consumption across a broad-spectrum of embedded processing applications.

This scalable desktop platform supports up to 32GB DDR3 1066/1333MHz memory, Intel® HD audio with S/PDIF input/output interface, 2 Gigabit LAN for increased transmission speed, and up to 2 UltraDMA 33/66/100Mbps IDE devices for extending extra hard disk storage. The Intel® Q67 express chipset used on this industrial motherboard delivers high performance I/O. It provides four Serial ATA 2.0 ports with speed up to 3Gb/s, two SATA 3.0 ports with speed up to 6Gb/s, 12 USB 2.0 ports, 6 Serial COM ports, and 8 digital I/O ports for device controls.

The SB630-CRM offers additional expansion capability via 1 PCIe x16 slot for video capture card, 1 PCIe x4 slot, 1 PCIe x1 or Mini PCIe slot, and 4 PCI slots

These features make the SB630-CRM ideal for intensive applications such as gaming machine, industrial control automation, medical equipment, telecom, and transportation.

SB630-CRM Standard Board Features:

  • ATX form factor (305mm x 244mm)
  • Supports Intel® CoreTM i7-2600, i5-2400, i3-2120 processors
  • Intel® Q67 Express Chipset
  • Up to 32GB DDR3 1066/1333MHz dual-channel memory
  • DVI and VGA interfaces supporting dual independent displays
  • 2 Intel Gigabit LAN controllers
  • 2 RS232/422/485 COM ports
  • 4 RS232 COM ports
  • 12 USB 2.0 ports
  • 2 Serial ATA interfaces (6Gb/s)
  • 4 Serial ATA interfaces (3Gb/s)
  • 8-bit Digital I/O
  • HD audio support via S/PDIF Input/Output
  • 1 PCIe x16 slot
  • 1 PCIe x4 slot
  • 1 PCIe x1 or Mini PCIe x1 slot
  • 4 PCI slots
  • Intel® vPro™ features AMT 7.0, VT, and TxT
  • Trusted Platform Module (TPM 1.2) – option

SDVO-LVDS Daughterboard Features (Optional):

  • Chrontel CH7308B
  • Supports 18/24-bit 1600×1200 LVDS panel
  • 1 LVDS LCD panel connector
  • 1 LCD/Inverter power connector
  • SDVO interface
  • Supports dimming control via hot keys
  • 45mm x 38mm

All product specifications are subject to change without notice. Intel® and Core™ are registered trademarks of the Intel Corporation in the U.S. and other countries.

Product Availability
The ITOX SB630-CRM embedded ATX board is available now.

For ordering information and OEM volume pricing, please contact ITOX at or call 888-200-4869 (732-390-2815 Outside USA).

About ITOX Applied Computing
Headquartered in East Brunswick, New Jersey, ITOX Applied Computing ( is the United States affiliate of DFI® Inc. Founded in 1987, the company is recognized nationwide as a leading supplier of x86 embedded motherboards and SBCs for use in light industrial and special OEM environments including voice messaging, medical electronics, industrial control, security & surveillance, telecommunications, ATM/POS, digital signage, gaming and kiosk systems.

As an independent ISO 9001:2008 registered firm, ITOX provides and supports both standard and custom-designed products ranging from ATX through Mini-ITX motherboards, small form factor SBCs, and COM modules. ITOX is committed to supporting customer requirements and continues to provide motherboards incorporating legacy ISA slots, along with PCI, PCI-X and PCI Express bus support.

Press Contact: Todd Shaner 732-390-2815, Ext. 6712,

Contact Information

ITOX Applied Computing

8 Elkins Road
East Brunswick, NJ, 08816

tele: 732.390.2815
fax: 732.390.2817

Share and Enjoy:
  • Digg
  • Sphinn
  • Facebook
  • Mixx
  • Google
  • TwitThis
Extension Media websites place cookies on your device to give you the best user experience. By using our websites, you agree to placement of these cookies and to our Privacy Policy. Please click here to accept.