Emerson Network Power Extends Range of ADN-C Series Slim Three-Phase DIN Rail Power Supplies

Carlsbad, Calif. [1 December, 2011] — Emerson Network Power – a business of Emerson (NYSE:EMR) and the global leader in enabling Business-Critical Continuity™, today extended its line of ultra compact ADN-C series three-phase DIN rail mounting power supplies with new 10 A and 5 A models. The power supplies are ideal for a wide range of heavy duty industrial applications – especially those involving large inductive loads – such as machine control, semiconductor fabrication, conveyor and material handling systems, including Class 1, Division 2 hazardous locations. Designed for high reliability, these new models have a mean time between failure (MTBF) of more than 500,000 hours, and are backed by a comprehensive five year warranty.

Designed to operate direct from standard three-phase inputs, the new Emerson Network Power ADN-C series power supplies have a wide 320 to 540 Vac input range, capable of accommodating virtually all standard line voltages worldwide. They are also capable of operating from a dc input, in the range 450 to 760 Vdc. The power supplies are very high efficiency designs: typically 85 percent for the new 5 A model and 91 percent for the 10A model.

Both of the new ADN-C series power supply models produce a single 24 Vdc output, which is user adjustable up to 28 Vdc. The 5 A ADN5-24-3PM-C is rated at 120 W and the 10 A ADN10-24-3PM-C at 240 W. A PowerBoost facility overcomes the disadvantage of output fold-over under the high peak current demands of switching large inductive loads, such as heavy duty relays, solenoids or motors. This can result in the device failing to activate or start. PowerBoost provides 1.5 times the supply’s nominal current for a minimum of 4 seconds, while maintaining a 20 V output to ensure successful operation.

The power supplies have a nominal full load operating temperature range of minus 25 to 60 degrees Celsius without derating, and are intended for fanless convection cooling. They are extensively protected against overvoltage, overload and continuous short-circuit conditions. A ‘DC OK’ relay output is also provided, for remote diagnostics and condition monitoring.

Emerson Network Power ADN-C power supplies meet all applicable international EMC emission and immunity standards – including the Semi F47 sag immunity standard for semiconductor fabrication equipment. The designs also comply with the EN 60950 Low Voltage Directive and the Restriction of Hazardous Substances (RoHS). Comprehensive safety approvals include UL 508 and UL/IEC 60950-1.

Emerson Network Power’s ADN-C series three-phase power supplies are available now. For more information, please see the ADN-C series three-phase series websheet.

A high resolution photo of the ADN-C series three-phase power supplies is available.

For more information on power supplies by Emerson Network Power, visit www.PowerConversion.com/power-supplies

About Emerson Network Power
Emerson Network Power, a business of Emerson (NYSE:EMR), is the global leader in enabling Business-Critical Continuity™ from grid to chip for telecommunication networks, data centers, health care and industrial facilities. Emerson Network Power provides innovative solutions and expertise in areas including AC and DC power and precision cooling systems, embedded computing and power, integrated racks and enclosures, power switching and controls, infrastructure management, and connectivity. All solutions are supported globally by local Emerson Network Power service technicians. For more information on Emerson Network Power’s embedded power products and services for original equipment manufacturers and system integrators visit www.Emerson.com/EmbeddedPower. Learn more about Emerson Network Power products and services at www.EmersonNetworkPower.com.

About Emerson
Emerson (NYSE: EMR), based in St. Louis, Missouri (USA), is a global leader in bringing technology and engineering together to provide innovative solutions for customers in industrial, commercial, and consumer markets through its network power, process management, industrial automation, climate technologies, and tools and storage businesses. Sales in fiscal 2011 were $24.2 billion. For more information, visit www.Emerson.com.

Business-Critical Continuity, Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. All other product or service names are the property of their respective owners. © 2011 Emerson Electric Co.

Contact Information

Artesyn Embedded Technologies

2900 South Diablo Way.
Suite 190
Tempe, AZ, 85282

tele: +1 888 412 7832
toll-free: +1 602 438 5720

Share and Enjoy:
  • Digg
  • Sphinn
  • del.icio.us
  • Facebook
  • Mixx
  • Google
  • TwitThis
Extension Media websites place cookies on your device to give you the best user experience. By using our websites, you agree to placement of these cookies and to our Privacy Policy. Please click here to accept.