Intel® Atom™ E6x0T Wide Temperature Solution on Qseven Module



East Brunswick, NJ March 6, 2012– DFI-ITOX today announced its wide temperature Qseven™ form factor module, QB701-B Series. The new module offers low power consumption, integrated memory, improved graphic processing support, I/O interface flexibility and wide temperature support from -20oC to 70oC making it suitable for various environments. This cutting-edge module pairs the Intel® PCH EG20T with the low power Intel® Atom™ processor E6x0T series. The Intel® Atom™ processor series is built on 45-nanometer process technology with integrated memory controller and graphics engine. This two-chip solution creates a tightly coupled system architecture providing higher performance than three-chip platform solutions.

The Intel® Graphics Media Accelerator (GMA) 600 graphics engine integrated in the processor supports 3D graphics with high definition hardware video decoder and encoder engine for graphics intensive and multimedia applications. This delivers up to 50% improvement to the graphics performance from previous generation Atom™ processors. LVDS and SDVO graphics interfaces provide dual independent display support up to 1280×768 @ 60Hz and 1280×1024 @ 85Hz resolutions, respectively.

In addition, this new platform supports Intel® Hyper-Threading Technology that enables each processor core to handle two instruction threads and dynamically increase the clock speed when all cores are not fully utilized. This provides a significant increase in performance at reduced power consumption across a broad-spectrum of embedded processing applications.

Its small form factor design features advanced I/O connectivity with 1 Gigabit LAN controller that delivers high speed networking, HD audio, 2 Serial ATA ports with speed up to 3Gb/s, 7 USB 2.0 host controller, 1 USB Host/Client, 3 PCIe x1 interfaces, 1 CAN-bus, and 1 SDIO/MMC interface. The DDR2 SDRAM onboard comes available in 512MB, 1GB, and 2GB options. This low power module also offers 2GB and 4GB onboard SSD storage device on two of its models in the QB701-B series.

The QB701-B embedded module board is perfect for a whole range of appli­cations requiring a stable revision-controlled platform, such as industrial control automation, kiosk, medical devices, and gaming machines.

QB701-B Features:

  • Qseven™ form factor (70mm x 70mm)
  • Intel® Atom™ E620T/E640T/E660T/E680T/E620/E640/E660/E680
  • Intel® EG20T PCH
  • 512MB/1GB/2GB DDR2 onboard
  • Integrated Intel® GMA 600 graphics supports 1280×768 LVDS and 1280×1024 SDVO dual independent display interfaces
  • 1 Gigabit Ethernet LAN controller
  • 2 SATA (3Gb/s)
  • 7 USB Host
  • 1 USB Host/Client
  • 3 PCIe x1
  • 1 CAN-bus
  • SDIO/MMC interface (Class 6)
  • 2GB/4GB SSD onboard (QB701-B620T012/QB701-B640T122)
  • Operating Temperature: -20°C to 70°C

All product specifications are subject to change without notice.

Intel® and Atom™ are registered trademarks of the Intel Corporation in the U.S. and other countries.

For more information, please contact DFI-ITOX at sales@itox.com or call 1-732-390-2815.

For more information on QB701-B, please visit: www.dfi-itox.com

About DFI-ITOX

Headquartered in East Brunswick, New Jersey, DFI-ITOX is the United States affiliate of DFI® Inc. Found in 1987, the company is recognized nationwide as a leading supplier of x86 embedded motherboards and SBCs for use in light industial and special OEM environments including voice messaging, medical electonics, industrial control, security & surveillance, telecommunications, ATM/POS, digital signage, gaming and kiosk systems. As an Associate member of the Intel® Embedded Alliance (IEA), DFI works closely with Intel® on development of next-generation standards-based building blocks, platforms and solutions for the communications and embedded market segments.

As an independent ISO 9001:2008 registered firm, DFI-ITOX provides and supports both standard and custom-designed products ranging from ATX through Mini-ITX motherboards, small form factor SBCs, and COM modules. DFI-ITOX is committed to supporting customer requirements and continues to provide motherboards incorporating legacy ISA slots, along with PCI, PCI Express buss support.

Contact Information

DFI

15 Corporate Place South
Suite 201
Piscataway, NJ, 08854
USA

tele: 1-732-390-2815
fax: 732-390-2817
gavin@dfi-itox.com
www.dfi-itox.com

Share and Enjoy:
  • Digg
  • Sphinn
  • del.icio.us
  • Facebook
  • Mixx
  • Google
  • TwitThis