Low-Cost microATX Embedded Board Supports 10 Serial COM for ATM/POS Solution

East Brunswick, NJMarch 3, 2012– DFI-ITOX today announces the SB336-Ni, the first microATX board that supports 10 Serial COM. This microATX form factor board pairs the cost-reduced Intel® H61 Express Chipset with the 2nd generation Intel® CoreTM i7-2600, i5-2400, and i3-2120 processors that feature 32-nanometer process technology providing higher performance at lower power than previous processors. For cost sensitive applications, the embedded board also supports the economical Intel® PentiumTM processor G850.

The Intel® HD Graphics 2000 engine integrated into these scalable desktop 2nd generation Intel® CoreTM processors supports six graphics execution units with dynamic turbo boost to accelerate video processing, and Intel® Clear Video Technology providing advanced imaging capability for Blu Ray and other high definition video processing. Performance is further increased through the introduction of Intel® Advanced Vector Extensions (AVX) to the instruction set, providing acceleration of complex audio, video, and image processing. The VGA graphics interface connector supports up to 2048 x 1536 @ 75Hz resolution.

In addition, this new platform supports Intel® Hyper-Threading and improved Intel® Turbo Boost Technology, which enables each processor core to handle two instruction threads and dynamically increases the clock speed when all cores are not fully utilized. This provides increased performance over the previous generation platform for both multi-core and non-multi-core optimized application programs. The combination of Intel® Hyper-Threading, Intel® Turbo Boost improvements, and the new three-level cache subsystem ensures higher performance at reduced power consumption across a broad-spectrum of embedded processing applications.

This scalable desktop platform supports up to 16GB DDR3 1066/1333MHz memory, 2-channel HD audio with S/PDIF input/output interface, and 1 Gigabit LAN for increased transmission speed. It offers additional expansion capability via 1 PCIe x16 expansion slot, and 2 PCI expansion slots.

The Intel® H61 Express chipset used on this microATX embedded board delivers high performance I/O. It provides 4 Serial ATA 2.0 ports with speed up to 3Gb/s, 10 USB 2.0 ports, and 10 Serial COM ports making it ideal for ATM and POS applications.

SB336-Ni Features

  • microATX form factor (244mm x 244mm)
  • Supports Intel® CoreTM i7-2600, i5-2400, i3-2120 processors
  • Intel® H61 Express Chipset
  • Up to 16GB DDR3 1066/1333MHz dual-channel memory
  • VGA interface supports up to 2048×1536 @ 75Hz
  • 1 Gigabit LAN controller
  • 10 RS232 COM ports
  • 10 USB 2.0 ports
  • 4 Serial ATA interfaces (3Gb/s)
  • HD audio support via S/PDIF Input/Output
  • 1 PCIe x16 slot
    2 PCI slots
  • Trusted Platform Module (TPM 1.2) – option

All product specifications are subject to change without notice.

Intel® and Core™ are registered trademarks of the Intel Corporation in the U.S. and other countries.

For more information, please contact DFI-ITOX at sales@itox.com or call 1-732-390-2815.

For more information on QB701-B, please visit: www.dfi-itox.com


Headquartered in East Brunswick, New Jersey, DFI-ITOX is the United States affiliate of DFI® Inc. Found in 1987, the company is recognized nationwide as a leading supplier of x86 embedded motherboards and SBCs for use in light industial and special OEM environments including voice messaging, medical electonics, industrial control, security & surveillance, telecommunications, ATM/POS, digital signage, gaming and kiosk systems. As an Associate member of the Intel® Embedded Alliance (IEA), DFI works closely with Intel® on development of next-generation standards-based building blocks, platforms and solutions for the communications and embedded market segments.

As an independent ISO 9001:2008 registered firm, DFI-ITOX provides and supports both standard and custom-designed products ranging from ATX through Mini-ITX motherboards, small form factor SBCs, and COM modules. DFI-ITOX is committed to supporting customer requirements and continues to provide motherboards incorporating legacy ISA slots, along with PCI, PCI Express buss support.

Contact Information


15 Corporate Place South
Suite 201
Piscataway, NJ, 08854

tele: 1-732-390-2815
fax: 732-390-2817

Share and Enjoy:
  • Digg
  • Sphinn
  • del.icio.us
  • Facebook
  • Mixx
  • Google
  • TwitThis
Extension Media websites place cookies on your device to give you the best user experience. By using our websites, you agree to placement of these cookies and to our Privacy Policy. Please click here to accept.