congatec provides low-cost entry to 4th Generation Intel® Core™ processors on COM Express

The low-cost COM Express Type 6 module conga-TS87/i3-4102E
is scalable up to the quad-core Intel® Core™ i7

congatec, Inc., a leading manufacturer of embedded computer modules, announces expanded processor support for the conga-TS87, a pin out Type 6 COM Express module based on the 4th Generation Intel® Core™ 2-chip solution. The most significant innovation is the introduction of Intel® Advanced Vector Extensions (Intel® AVX) 2.0 for improved floating point instructions in signal and image processing.

In addition to the existing quad-core Intel® Core™ i7-4700EQ processor, other variants such as Intel® Core™ i3-4100E (TDP 25W) are now also supported at an attractive entry price. Extended and consistent scalability is achieved by the new Intel® Core™ i5-4100E processor. A total of five processors of the 4th Generation 2-chip solution are now available on COM Express.

Compared with the previous generation, the focus of 4th Generation Intel Core 2-chip processors is clearly on increased performance per watt. This is particularly evident in the instruction set and vector processing unit expansions, where the already high performance has almost doubled. Sophisticated calculations such as simulations and CAD or imaging/image processing applications for tomography, radar or optical inspection benefit greatly from this performance improvement. As an additional advantage, the processing units of the integrated GT2 graphics can be used via OpenCL programming when the 3D graphics is not used elsewhere. Thanks to the new variable coder and 4K2K support for large displays, it is possible to tackle even the most demanding multimedia and gaming applications.

The Intel® Advanced Encryption Standard New Instructions (Intel® AES-NI) set is more relevant than ever. It enables the offloading of particularly compute-intensive packaging and encryption routines of the well-known cryptographic algorithm AES (Advanced Encryption Standard) into hardware. This results in high performance encryption without putting a significant burden on the CPU cores.

Intel® AMT 9.0 enables remote maintenance and PC control (e.g switching on/off), the display of status information, and the modification of configurations. I/O devices are forwarded or redirected via Serial Over LAN (SOL). With AMT 9.0, it is possible to manage, inventorize, diagnose and repair a system – even when it is disconnected, the operating system is not responding, or the hard drive is defective.

The conga-TS87 COM Express module with pin out Type 6 takes advantage of integrated graphics and the associated advanced digital display interfaces. The module also utilizes the high bandwidth of USB 3.0 and PCI Express 3.0 with additional PCI Express lanes.

The COM Express module is equipped with the Mobile Intel® QM87 Express chipset and supports dual-channel DDR3L memory up to 16 GB, 1600 MT/s. The integrated graphics is significantly more powerful than previous models and supports Intel® Flexible Display Interface (FDI), DirectX 11.1, OpenGL 4 and OpenCL 1.2, as well as high-performance, flexible hardware decoding for parallel decoding of multiple high-resolution full HD videos.

4K2K pixel resolution of up to 3840 x 2160 with DisplayPort and 4096 x 2304 with HDMI is natively supported in the processor. In addition, it is possible to daisy chain up to three independent display interfaces via DVI, LVDS and VGA.

Seven PCI Express 2.0 lanes, PCI Express 3.0 graphics (PEG) x16 lanes for high-performance external graphics cards, four SATA ports with up to 6 Gb/s and RAID support and one Gigabit Ethernet interface enable fast and flexible system extensions. Active fan control, LPC bus for easy integration of legacy I/O interfaces and Intel® High Definition Audio complete the feature set.

The following CPU versions are available:


*Programmable TDP

AES-NI: Advanced Encryption Standard Instructions
AVX: Advanced Vector Extensions
AMT: Active Management Technology
TXT: Trusted Execution Technology
VT-x: Intel Virtualization Technology
VT-d: Intel Virtualization Technology for Directed I/O

About congatec, Inc.
congatec, Inc., with its headquarters in San Diego, California, is the leading supplier of industrial computer modules using the standard form factors Qseven, COM Express, XTX and ETX. congatec’s products can be used in a variety of industries and applications, such as industrial automation, medical technology, automotive supplies, aerospace and transportation. Core knowledge and technical know-how includes unique extended BIOS features as well as comprehensive driver and board support packages. Following the design-in phase, customers are given support via extensive product lifecycle management. The company’s products are manufactured by specialist service providers in accordance with modern quality standards. congatec, Inc. is a subsidiary of the German based company congatec AG, which has additional entities in Taiwan, the Czech Republic, Japan and Australia.  More information is available on our website at or via Facebook, Twitter and YouTube.

Intel and Intel Core are trademarks of Intel Corporation in the U.S. and other countries.
congatec is a business partner of the Intel® Intelligent Systems Alliance, a joint venture of communications and embedded developers and solution providers.

Contact Information

congatec, Inc.

6262 Ferris Square
San Diego, CA, 92121

tele: 858-457-2600 x 304
fax: 1 858-457-2602

Share and Enjoy:
  • Digg
  • Sphinn
  • Facebook
  • Mixx
  • Google
  • TwitThis
Extension Media websites place cookies on your device to give you the best user experience. By using our websites, you agree to placement of these cookies and to our Privacy Policy. Please click here to accept.