DFI Announces Dual Socket EATX Motherboard that Supports Intel® Xeon® E5-2600 v2 Processors

DFI, a leading manufacturer of embedded computers, today brings a new EATX form factor, the RL830-C602/C604, with the Intel® C602J/C604 chipset and support for dual Intel® Xeon® E5-2600 v2 processors based on 22nm process technology providing higher intelligent performance with more cost-effective and energy-efficient power consumption than previous generations.

Increased memory capacity supported by DDR3 DRAM technology for x4, x8, and x16 devices is provided with 16 DDR3 DIMM sockets with 4 memory channels per processor delivering the maximum performance up to 512GB at 800/1066/1333/1600MHz low voltage memory storage for faster communication between components. The 1 Intel® Gigabit LAN controller supporting 4 RJ45 LAN ports integrates into the 1GB transceiver for increased transmission speed.

The integrated VGA graphics controller offers higher outstanding graphics computing with up to 50% 3D graphics performance improvement. The RL830-C602/C604 EATX platform powered by dual Intel® Xeon® E5-2600 v2 processors offers higher performance and power with improved I/O controllers via the Intel® C602J/C604 chipset for the state of lowest-available power on workload requirements. The 8 USB 2.0 ports, containing 4 USB 2.0 ports, 2 external USB 2.0 ports, 1 embedded USB connector for eUSB SSD, and 1 vertical Type A USB 2.0 port for securing USB flash drive, allow your system to process more data load. This new embedded EATX platform also supports 2 Serial COM ports which support RS232 with hardware auto flow control to fulfill the demand of industrial applications.

The integrated Advanced Host Controller Interface (AHCI) controller supports RAID 0/1/5/10. The RL830-C602 offers 6 Serial ATA ports: 2 SATA 3.0 ports with data transfer rate up to 6Gb per second and 4 SATA 2.0 ports with data transfer rate up to 3Gb per second. The RL830-C604 provides 10 Serial ATA ports, including 2 SATA 3.0 ports and 8 SATA 2.0 ports.
4 PCIe x16 interfaces (PCIe 3.0, for high graphics displays) and 2 PCIe x8 interfaces (PCIe 3.0) are available on the RL830-C602 /C604 platform for the additional expansion design in order to provide customers’ various demands.

The RL830-C602/C604 EATX embedded motherboard offers a cost saving solution through better manageability and improved security which enables you to better manage and secure your computers with client isolation, network filtering, security agents and anti-virus protection. All these features described above make it an ideal EATX platform for driving innovations in variety of compute-intensive embedded applications such as retail, medical, and industrial manufacturing.

RL830-C602-J/C604 Features

  • EATX form factor (305mm x 330mm)
  • Dual Intel® Xeon® E5-2600 v2 processors
  • Intel® C602J/C604 Chipset
  • 16 DDR3 DIMM sockets support up to 512GB
  • 1 VGA interface supports Aspeed AST 1400
  • 1 Intel® PCI Express Gigabit Ethernet controller supports 4 LAN ports
  • 2 RS232 Serial COM ports
  • 8 USB 2.0 ports
    • 4 USB 2.0/1.1 ports
    • 1 connector for 2 external USB 2.0/1.1 ports
    • 1 embedded USB connector for eUSB SSD
    • 1 vertical Type A USB 2.0 port
  • SATA ports
  • Intel® C602J chipset: 6 Serial ATA ports
    • 2 SATA 3.0 interfaces with data transfer rate up to 6Gb/s
    • 4 SATA 2.0 interfaces with data transfer rate up to 3Gb/s
  • Intel® C604 chipset: 10 Serial ATA ports
    • 2 SATA 3.0 interfaces with data transfer rate up to 6Gb/s
    • 8 SATA 2.0 interfaces with data transfer rate up to 3Gb/s
  • 4 PCIe x16 interfaces (PCIe 3.0)
  • 2 PCIe x8 interfaces (PCIe 3.0)
  • Operating temperature range: 0°C to 50°C
  • Storage temperature range: -20°C to 85°C
  • Humidity range: 10°C to 90°C

About DFI®

Established in 1981, DFI® is a leading supplier of high-performance computing technology worldwide. With more than 33 years of experience, DFI® focuses on innovative design and manufacture of leading-edge board and system level products for embedded applications requiring strict revision control and long life availability. DFI uses the latest technology platforms and manufacturing techniques to produce cost-effective products for use in medical diagnostic & imaging, ATM/POS, industrial control, kiosk, security & surveillance, digital signage, gaming, and other embedded applications. As an Associate member of the Intel® Intelligent Systems Alliance, DFI works closely with Intel® on development of next-generation standards-based building blocks, platforms and solutions for the communications and embedded market segments.

Contact Information


15 Corporate Place South
Suite 201
Piscataway, NJ, 08854

tele: 1-732-390-2815
fax: 732-390-2817

Share and Enjoy:
  • Digg
  • Sphinn
  • del.icio.us
  • Facebook
  • Mixx
  • Google
  • TwitThis
Extension Media websites place cookies on your device to give you the best user experience. By using our websites, you agree to placement of these cookies and to our Privacy Policy. Please click here to accept.