ITOX Announces Intel® AtomTM Processor N450-Based Fanless Mini-ITX Industrial Motherboard – LR100-N16M
East Brunswick, NJ –January 7, 2009 – ITOX today announces a new mini-ITX form factor motherboard, LR100-N16M offering low power consumption, higher-performance, and fanless cooling. This board utilizes the latest two-chip Intel® AtomTM processor N450 and Intel® 82801HM I/O Controller (also referred to as “ICH8M”) system solution. This smaller integrated two-chip platform uses approximately 40% less board space than previous generation three-chip solutions, and provides higher performance per watt than any previous Intel® Atom™ processor-based platform.
The LR100-N16M mini-ITX motherboard is equipped with a 45nm Hi-K technology Intel® AtomTM processor N450 with 5.5W TDP, 667MHz front side bus (FSB) and 1.67GHz core frequency. In addition, this single core processor features a 512kb 8-way L2 cache, 64bit computing support using Intel® 64 architecture, on-die memory and graphics controllers, all in a small Micro-GCBGA8 package. Integrating the memory and graphics controllers on the processor die increases performance, reduces the board footprint, and lowers power consumption over the previous generation three-chip platforms.
Support is provided for up to 2GB of DDR2 667 MHz single-channel system memory and dual PCI Express Gigabit LAN controllers. Additional features include The Intel® GMA 3150 graphics engine – an improved graphics accelerator with VGA and LVDS interfaces providing dual-independent display capability for graphics intensive and multimedia applications. The integrated graphics engine contains a refresh of the 3rd generation graphics core supporting DirectX 9.0c compliant Pixel Shader 2.0. The LR100-N16M also provides ACPI 3.0 Power management with Intel® SpeedStep technology, three Serial ATA ports with speed up to 3Gb/s, ten USB 2.0/1.1 ports, four Serial COM ports, one CompactFlash socket and high-definition audio support with S/PDIF input/output interface. This embedded Mini-ITX motherboard provides expansion using 1 PCI Express x1 slot for networking and RAID cards, and 1 PCI slot to support legacy card functions.
This low-power motherboard is ideal for applications requiring a stable revision-controlled platform, such as medical equipment, industrial control automation, POS terminals and Kiosk embedded applications. These applications benefit from the smaller Mini-ITX board form factor and lower power requirements of the Intel® AtomTM processor N450 and Intel® 82801HM I/O Controller Hub.
ITOX LR100-N16M Features
- Mini-ITX form factor
- Intel® AtomTM processor N450
- Intel® 82801HM I/O Controller
- Up to 2GB of DDR2 667 MHz SODIMM memory
- Integrated Intel® GMA 3150 Graphics Engine
- 2 PCI Express Gigabit Ethernet LAN controllers
- VGA port
- LVDS port
- 1 PCI Express x 1 slot
- 1 PCI slot
- 10 USB ports
- 4 Serial COM ports
- 3 SATA ports
- 1 CompactFlash socket
Intel and Intel Atom are registered trademarks of Intel Corporation in the US and other countries.
About ITOX Applied Computing
Headquartered in East Brunswick, New Jersey, ITOX Applied Computing (www.itox.com) is the United States affiliate of DFI-ACP. Since its founding in 1987, the company has been recognized in the U.S. markets as a leading supplier of x86 embedded motherboards and SBCs for use in light industrial and special OEM environments including voice messaging, medical electronics, industrial control, security & surveillance, telecommunications, ATM/POS, digital signage, gaming and kiosk systems.
As an independent ISO 9001:2000 registered firm, ITOX provides and supports both standard and custom-designed products in form-factors ranging from ATX through Mini-ITX, ECX, EPIC and COM Express. ITOX is committed to supporting customer requirements and continues to provide motherboards incorporating legacy ISA slots, along with PCI, PCI-X and PCI Express bus support.
For more information, contact ITOX at sales@itox.com or call 888-200-4869 (732-390-2815 Outside USA) Ext. 6712.
Contact Information
ITOX Applied Computing
8 Elkins RoadEast Brunswick, NJ, 08816
USA
tele: 732.390.2815
fax: 732.390.2817
sales@itox.com
www.itox.com
