PCI Express

AMTELCO XDS

The Best Choice for PCI Express!

With built-in intelligence, the AMTELCO XDS PCI Express T1/E1/J1 Boards are the best choice for your applications! The XDS PCIe T1/E1/J1 boards are available in four and eight span configurations, and feature Primary Rate ISDN for both T1 and E1, and selectable 75 ohm/120 ohm E1 interface, or 100 ohm T1 interface.

The XDS PCIe T1/E1/J1 boards include D4 and ESF framing for T1, AMI, and B8ZS support for T1, CRC4 and HDB3 support for E1, along with program access to either PRI layer 2 or 3 for port control. Also included is DTMF detection and generation (one per B channel), call progress tone generation, and status LEDs for each port that provide red, yellow, and blue alarm indications. Robbed-bit signaling protocols include ground start, loop start, E&M and Q.421. These boards also support QSIG features for interfacing to PBXs that are QSIG enabled. Currently supported audio playback formats include A-law, μ-law, and ADPCM. The Voice Resource Library is supported in various operating systems.

The AMTELCO XDS PCIe T1/E1/J1 boards are PCIe compliant. Software drivers are available for the most common operating systems, including Microsoft® Windows®, Linux, Debian, Ubuntu, Gentoo Linux 2006.0 (kernel 2.6), and Fedora Core 5 (kernel 2.6). An Asterisk® channel driver is also available.

AMTELCO software driver packages are distributed free of charge to XDS customers, with open source code for the driver and all supporting applications. Complete software driver packages are available for download on the XDS Web site.

Watch for these new XDS boards – coming soon!

XDS PCIe 8-Port 2/4-Wire E&M Board supporting Type I and Type V signaling protocols, as well as independent control of signaling leads for use with radio interfaces and push-to-talk applications
XDS PCIe 12 and 24-Port Loop Start Boards with incoming Caller ID support
XDS PCIe 24-Port High Density Station Port Board with support for Caller ID information display, visual Message Waiting Indicators, and on-board ring generation

FEATURES & BENEFITS

The 8-Span XDS PCIe T1/E1/J1 board features:

Eight T1/E1 spans
256 channels of voice resources with call analysis capabilities
Two analog inputs for music-on-hold

The 4-Span XDS PCIe T1/E1/J1 board features:

Four T1/E1 spans
128 ports of conferencing
128 channels of voice resources with call analysis capabilities
Two analog inputs for music-on-hold

Contact Information

AMTELCO XDS

tele: 608.838.4194
toll-free: 800.356.9224
fax: 608.838.4194
xds.amtelco.com
xds@amtelco.com

Share and Enjoy:

This entry was posted on Tuesday, October 20th, 2009 at 2:30 pm and is filed under Boards/Hardware, Datasheet.

Featured White Papers

Designing multiple PCI Express processor nodes into xTCA host systems

Limited support for multiple processor nodes within the PCI Express® fabric has presented a barrier to wider adoption of PCI Express-based systems in xTCA architectures. This paper describes how advances in configurable Processor AdvancedMC™ module technology resolve the issue in PCI-Express-based MicroTCA™ and AdvancedTCA® systems.

Implementing ATCA Serving Gateways for LTE Networks

One key challenge of LTE is how core network components will keep up with massive increases in access link throughput (e.g., seven times HSPA data rates). How evolved core network equipment manufacturers rise to this challenge will be critical for determining subscriber satisfaction with their LTE service experiences. To focus on the challenge, this article discusses the “best practices” approach for building an ATCA Serving Gateway node, the very backbone of the LTE network user plane.

AMTELCO XDS