Benefits

• Delivers 600 MHz to 1.2GHz performance (CPU)
• 32-KB Instruction and Data Caches
• 256-KB L2 Cache with parity protection, may also be used as on-chip SRAM
• 64-KB On Chip Memory
• DDR1/2 memory support
• Single/double-precision floating point unit for math-intensive applications
• Two PCI-Express interfaces
• SATA controller
• 10/100/1000 Mbit/s Ethernet support
• Security (optional)
• NAND Flash support
• Extensive connectivity by means of on-chip Ethernet, USB, UARTs, IIC, SPI and PCI
• Offers low power dissipation and small form factor for high-density and power-conscious applications

With speeds of up to 1.2GHz, support for oating-point operations, USB 2.0, PCIExpress, SATA, Gigabit Ethernet, security, NAND Flash interfaces and low power dissipation, the PowerPC 460EX embedded processor is ideally suited to a wide range of high-performance applications, including imaging, industrial control and networking.

The PowerPC 440 Core

To enhance overall throughput, the PowerPC 440 superscalar core incorporates a 7-stage pipeline and executes up to two instructions per cycle. Its large 32-KB data cache and 32-KB instruction cache are 64-way setassociative. Versatile congurations enhance performance tuning while optional parity protection preserves data integrity. For additional system performance, the PowerPC 440 core includes dynamic branch prediction and 24 multiply accumulate instructions (MAC) that can be used for signal processing or other numerical tasks, as well as non-blocking caches that can be managed in either writethrough or write-back mode.

Turbo Security (Optional)

The PPC460EX delivers advanced security capabilities with the optional Turbo Security Engine. This security engine attaches directly to the PLB4 bus for the fastest possible throughput between the PPC460 processor, memory, and the security engine itself. The Turbo Security engines supports DES, 3DES, AES, ARC-4 encryption, MD-5, SHA-1 and SHA-256 hashing. The security engine includes a pseudo random number generator as well as header and trailer protocol processor. The header/trailer protocol processor eliminate any need for security processing by the PPC460 processor, freeing it to handle applicationbased operations, while improving overall security performance. The engine incorporates an on-chip true random number generator and a public key accelerator. The algorithms are compliant with FIPS-140-2 and ANSI X9.17 Annex C.

High-Bandwidth Bus Architecture

The PowerPC 460EX 128-bit processor local bus (PLB) provides a two-way crossbar, with a separate 128-bit read and 128-bit write data bus for each way. The four 128-bit data buses may operate concurrently, providing up to 12.8 GBs/s of peak on-chip bandwidth at 200 MHz. The SDRAM controller attaches to both PLB slave segments to provide optimal access to memory from any other peripheral/core. Lower bandwidth I/O devices are supported by the onchip peripheral bus (OPB).

Extensive Memory Support

An on-chip double data rate 1/2 (DDR1/2) SDRAM controller provides a 32/64-bit memory interface with optional error checking and correcting (ECC). It supports four memory banks of up to 4 GBs each, for a maximum capacity of 16 GBs. An integrated NAND Flash controller allows up to four banks of Flash memory devices to be connected to the processor’s external peripheral bus. The Flash controller supports device densities up to 256 Mbytes. It can also interface to an optional SmartMedia card interface. Theses devices can be accessed much like diskette drives, with available boot capability.

On-Chip Memory

The PowerPC 460EX oers 64 KB of on-chip memory.

PCI Express and PCI Interfaces

The 460EX ofers two independent PCI-Express interfaces compliant with PCI-Express base speciffcation 1.1. One interface has four lanes and supports x4 or x1 configurations. The other interface has one lane. Both interfaces can be congured as root or end point ports. In addition, the 460EX offers a 32-bit PCI V2.2 interface and supports frequencies of up to 66 MHz. Multiple read prefetch and write post buffers enhance throughput, while the ability to boot the processor from PCI bus memory increases functionality.

SATA

The 440EX offers an on-chip one port SATA controller. Fully compliant with Serial ATA II speciffcations, the SATA controller supports both 1.5Gb/s and 3.0 Gb/s.

Dual Ethernets with QoS and TCP/IP Acceleration Hardware

For extensive connectivity options, the 460EX oers two integrated 10/100/1000 Ethernet ports with TCP/IP Acceleration Hardware, QoS and Jumbo Frame support. Supports GMII/MII, TBI, RTBI, RGMII, SGMII and SMII interfaces.

USB Interface

The 460EX includes USB 2.0 host and OTG controllers able to operate at 1.5, 12 and 480Mbps.

External Bus Interface

To accommodate connectivity with other devices, the PowerPC 460EX offers a 32-bit bus supporting up to six ROM, RAMor slave peripheral I/O devices and speeds up to 100 MHz. The 4-Channel DMA is also supported.

Standard Peripherals

The PowerPC 460EX offers support for up to 64 general-purpose I/O (GPIO) and two IIC controllers. A serial peripheral interface (SPI), also referred to as a serial communications port (SCP), allows full-duplex, synchronous data exchanges with other serial devices. The 460EX also supports up to four UARTs in a variety of configurations. A JTAG interface is provided for debugging purposes.

PowerPC Partners Ecosystem

AMCC’s embedded PowerPC processors are supported by an extensive ecosystem of products and services from a wide range of leading suppliers. AMCC’s PowerPC Partners program includes industry standard providers of:

• Embedded operating systems
• Hardware and software development tools
• Embedded software products and services
• Board-level products
• System design services
• Technical training.

For full details of the products and services available through the PowerPC Partners program, or to browse support available for a specic processor, visit: http://www.amcc.com/Embedded/Partners AMCC also provides an evaluation kit for this PowerPC processor, including an optimized evaluation board as well as sample applications and other software.

Features

•CPU Speed (frequency): 600 MHz to 1.2GHz

• Performance: 2.0 DMIPS/MHz (2,400 DMIPS @ 1.2 GHz peak)
• 32-KB-I/32-KB-D L1 caches, and 256-KB L2/SRAM with parity protection
• 64KB On Chip Memory
• On-chip double data rate 1/2 (DDR1/2) SDRAM controller with 32/64-bit interface

– Support for four banks of DDR SDRAM memory of up to 4 GB each, maximum capacity of 16 GBs with CAS latencies of 2, 3, 4, 5, 6, and 7

• Two PCI-Express interfaces, one with four lanes and one with one lane; 2.5-Gbit/s full duplex per lane; compliant with PCI-Express base specication 1.1; congurable as root or end point

• 32-bit PCI V2.2, 3.3-V interface supporting frequencies of up to 66 MHz

• One port SATA controller operating at up to 3.0Gb/s. Compliant with Serial ATA II specications

• 5-stage FPU with 2.0 MFLOPS/MHz (SP/DP); hardware support for IEEE 754; singleprecision and double-precision operation with thirty-two 64-bit floating-point registers

• On-chip IPSec/SSL acceleration (optional)

• NAND Flash controller. Supports one to four banks of NAND Flash memory devices; direct interfacing to discrete NAND Flash devices (up to four devices) and Smart- Media Card socket (22-pins); 4-Mbyte – 256-Mbyte devices sizes supported; 512- byte +16-byte or 2-KB +64-byte device page sizes supported; DMA support allows direct, no processor-intervention block copy from NAND Flash out to SDRAM; boot-from-NAND supported

• 4-channel DMA – available for internal and external use – Support for memory-to-memory, peripheral-to-memory, and memory-toperipheral transfers – Scatter/gather capability
• 1-channel high performance DMA for internal use
• USB 2.0 OTG controller and USB 2.0 Host controller operating at 1.5Mbps, 12 Mbps and 480Mbps
• (2) Ethernet 10/100/1000-Mbit/s, full-duplex MACs with TCP/IP Acceleration Hardware, QoS, and Jumbo Frame support, supporting GMII/MII, TBI, RTBI, RGMII, SGMII, SMII interfaces. Memory access layer (MAL) provides DMA capability to both Ethernet channels
• Up to 100 MHz, 27-bit address bus, 32-bit data bus external bus control (EBC) interface

– Support for up to 6 ROM, RAM, or slave peripheral I/O devices

• Two IIC (with one integrated boot strap controller)
• One SPI serial interface
• Programmable interrupt controller with 16 external inputs, 48 internal inputs
• Programmable timers
• General-purpose I/O (64)
• Support for JTAG board testing, JTAG debuggers, and 4xx instruction trace interface
• RoHS compliant (lead-free) version available

For more information, please visit http://www.amcc.com.

Specifications

Technology

• 90nm CMOS

Process Performance (estimated)

• 1,200 Dhrystone 2.1 MIPS @ 600 MHz
• 2,400 Dhrystone 2.1 MIPS @ 1.2GHz

Frequency

• CPU: 600 MHz to 1.2GHz
• DDR1/2 Memory: 32/64 bit width
• PCI: 32-bit, 33 MHz to 66 MHz
• PCI Express

– One 4-lane @ 2.5 Gbit/s per lane/direction

– One 1-lane @ 2.5 Gbit/s per lane/direction

• SATA Controller

– One port @ 1.5 or 3.0Gb/s

Typical Power Dissipation

• <6 W @ 1 GHz (estimated)
• Core/FPU <2.5 W @ 600 MHz

Case Temperature Range

• -40 ° to +85 ° C

Power Supply

• 1.25 V (logic), 1.8 V (DDR2), 2.5 V (DDR1, Ethernet, USB), 3.3 V (PCI, other I/O)

Signal I/Os

• 429

Packaging

• 728-TE-EPBGA, 35 mm x 35 mm (1-mm ball pitch)

For technical support, please call 1-800-840-6055 or 858-535-6517, or email support@amcc.com. AMCC reserves the right to make changes to its products, its datasheets, or related documentation, without notice and warrants its products solely pursuant to its terms and conditions of sale, only to substantially comply with the latest available datasheet. Please consult AMCC’s Term and Conditions of Sale for its warranties and other terms, conditions and limitations. AMCC may discontinue any semiconductor product or service without notice, and advises its customers to obtain the latest version of relevant information to verify, before placing orders, that the information is current. AMCC does not assume any liability arising out of the application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others. AMCC reserves the right to ship devices of higher grade in place of those of lower grade. AMCC SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, INTENDED, AUTHORIZED, ORWARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT APPLICATIONS, DEVICES OR SYSTEMS OR OTHER CRITICAL APPLICATIONS. AMCC is a registered trademark of Applied Micro Circuits Corporation. PowerPC and the PowerPC logo are registered trademarks of IBM Corporation. All other trademarks are the property of their respective holders. Copyrigh ©2007 Applied Micro Circuits Corporation. All Rights Reserved. POWERPC460EX_PB_v1.03_04_05_2007