6 and 9-axis DOF sensors are creating a new paradigm in the combos business



Over the last years, inertial MEMS have been subject to dramatic market & technological evolution. This has been driven by a large increase of the consumer market. Along with “stand-alone” MEMS devices, inertial combo sensors – a combination of several inertial sensors in a single package – are also coming. Main applications are consumer – e.g. accelerometer with magnetometer or accelerometer with gyro – and automotive for ESC and rollover functions first. To give clues about the differences in cost, size, package, structures … of the different inertial MEMS, Yole Développement and System Plus Consulting have released their new report “Inertial MEMS Manufacturing Trends 2014”.

yoleCurrent technological developments are motivated by several market drivers. For example, integrators for consumer products apply strong price pressure on component manufacturers, thus motivating die size reduction in order to lower manufacturing costs and change the manufacturing platform. Other industry requirements include low-power consumption for mobile applications, better performance and higher integration of functionalities. These required improvements have been the same for some time now. The difference mainly lies in the way that technology adapts in order to meet these increasingly stringent specifications. Over the past several years, the tendency was to increase the number of axes for stand-alone components while decreasing size. Now, the industry favors complete integration of 9+ axis sensors and platform standardization.

Indeed, in term of detection principle, and in terms of physical concepts in general, Yole Développement and System Plus Consulting haven’t seen many disruptive approaches reach the market, aside from Qualtré BAW-based inertial sensors. Nevertheless, strong efforts have been made to develop standardized platforms – for example, Teledyne DALSA now offers a generic platform for accelerometers and gyroscopes, as does STMicroelectronics via its THELMA process. Moreover, a very innovative approach in terms of standardization can be seen in CEA-LETI’s M&NEMS platform, in which the company intends to use silicon nanogauges as detection principle for their accelerometers, gyroscopes and magnetometers. The concept lies in using nanoscale gauges for detection, thus increasing sensitivity and reducing size, while keeping a microscale mass for better detection reliability. M&NEMS technology allows for the integration of 9-axis sensors with small form factor. This process is expected to enter production through Tronics Microsystems within the next few years.

Innovation also comes from back-end processing. Packaging issues had to be leveraged in order to attain the high integration required by advanced inertial combos. Key packaging developments and innovative front-end approaches are analyzed in this report.

For the first time ever, Yole Développement & System Plus Consulting analysis is illustrated by more than 40 reverse engineering studies of diverse commercial components!

46 inertial MEMS components have been reverse engineered to provide insights and data regarding accelerometers, gyros and combos. In this report, a reverse costing simulation of the MEMS, ASIC and packaging parts of these devices has also been made. These tasks were performed by System Plus Consulting, Yole Développement’s sister company. The report compares performance, cost, size (MEMS, ASIC and package), ASIC lithography node and manufacturing approach results. This factual analysis well underlines the previously mentioned trends, and permits a concrete visualization of different companies’ current status in terms of integration. This analysis is complimented by the 23 devices that were reverse engineered for the previous report in order to visualize general trends over a five year timeframe. One noticeable evolution shown in this report is that sensor die size has stabilized over the last few years, while prices continue dropping. Yole Développement & System Plus Consulting report also shows how die size reduction has been achieved through new packaging approaches (i.e. new sealing bond).

By 2018, the inertial sensor market will reach almost 1,000K 8” equivalent wafers The inertial sensor market has been very active over the past few years, and innovation is ongoing. Today these sensors represent the largest MEMS market (accounting for more than $3.5B in 2012) and Yole Développement and System Plus Consulting analysts don’t see this changing any time soon. Stand-alone inertial devices (1 – 3 axis accelerometers, gyroscopes and magnetometers) have matured over the last several years, and they will soon start to decline. In terms of value, this decline has already begun in the consumer accelerometer 3 market. Nevertheless, the inertial sensor market can rely on combos for its future growth. Currently, accelerometer/gyroscope combos, e-compass and 9-axis sensors are penetrating consumer applications. For example, 9-axis combos are expected to be an $850M market in five years.

The consumer market remains the main opportunity for inertial sensors. Also, the automotive industry will benefit from the integration of gyroscopes and accelerometers on the same components for ESC applications, representing a $625M opportunity for gyroscope/accelerometer combos by 2018.

Yole Développement’s report provides an understanding of the market drivers for inertial MEMS. It also gives trends about packaging and test strategies. Yole Développement analysed 23 MEMS devices in terms of cost, size, package type, performance. The company also proposes a comparative analysis in terms of performance, cost, MEMS size, ASIC cost, ASIC size, package size, year for market introduction.

About Inertial MEMS Manufacturing Trends 2014 report – Volumes 1 & 2:
Authors:

Dr. Eric Mounier. Since 1998, he is a cofounder of Yole Développement. Eric is in charge of market analysis for MEMS, equipment & material, photonics and Printed Electronics. He is Chief Editor of MEMS’ Trends & Micronews magazines. Before joining Yole Développement, Eric worked as a market analyst at CEA Leti. He has a PhD in microelectronics from the INPG in Grenoble.

Romain Fraux is Project Manager for Reverse Costing analyses at System Plus Consulting. Since 2006, Romain is in charge of costing analyses of MEMS devices, Integrated Circuit and Advanced Packaging. He has significant experience in the modeling of the manufacturing costs of electronics components. Romain has a BEng from Heriot-Watt University of Edinburgh, Scotland and a master’s degree in Microelectronics from the University of Nantes, France.

Laurent Robin is in charge of the MEMS & Sensors market research at Yole Developpement with a focus on inertial sensors & RF MEMS related technologies. He holds a Physics Engineering degree from the National Institute of Applied Sciences in Toulouse, plus a Master Degree in Technology & Innovation Management from EM Lyon Business School, France.

Antoine Bonnabel works as market & technology analyst for MEMS devices and technologies at Yole Développement. He holds a M.Sc. in microelectronics and microsystems from Grenoble Institute of Technologies and a M.Sc. in marketing and business management from Grenoble Graduate School of Business. 4

Companies cited in the report (non-exhaustive list):

Aichi MI, AKM, Alps Electric, AMS, Analog Devices, Apple, Archos, Aruba Networks, ASE, Atlas, Atmel, Babolat, Baolab, Blackberry, Bosch Sensortec, Broadcom, Cambridge Mechatronics, Casio Micronics, CSR, DNP, Domintech, EMMicroelectronics, Epson, FitBark, Fitbit, Freescale, Fujitsu, Full Flight Technology, Garmin, Gionee, GlobalFoundries, Google, Hana Microelectronics, Hillcrest Labs, Hisense, Honeywell, HTC, Huawei, ICsense, Instabeat, Intel, InvenSense, Isentek, Jabra, JCAP, Kionix, KYEC, Kyocera, LG, Lingsen Precision Industries, Marvell, Maxim, Mcube, Mediatek, Melexis, Memsic, Metaio, Microsistemler, Microsoft, MiraMEMS, Mobiplex, Mosoro, Motorola, Movea, MultiDimension, Technology, Murata, NEC, Nike, Nikon, Nintendo, Nokia, Nvidia, NXP, Nyko, Orbotix, Panasonic, Pantech, Pebble, PNI Sensors, QFO Labs, QST, Qualcomm, Qualtre, Recon, Rohm, SAE Magnetics, Samsung, Senodia, Sensitec, SensorPlatforms, Sharp, Sigurd, Sixense Entertainment, SMIC, Sony, Sony Mobile, Spreadtrum, STMicroelectronics, TCL, Teledyne DALSA, ThalmicLabs, TI, TomTom, Toshiba, Tronics, TSMC, TUMEMS, Vuzix, Whistle, Withings, Xfab, Xiaomi, Xsens, Yamaha, ZTE and many more.

Catalogue price:

Executive summary: Euro 2,490 / Full report: Euro 7,990 (multi user license) / One volume: Euro 5,990 (multi user license)

Publication date: March 2014

For special offers and the price in dollars, please contact David Jourdan (jourdan@yole.fr or +33 472 83 01 90).


About Yole Développement – www.yole.fr

Founded in 1998, Yole Développement has grown to become a group of companies providing marketing, technology and strategy consulting, media in addition to corporate finance services. With a strong focus on emerging applications using silicon and/or micro manufacturing, Yole Développement group has expanded to include more than 50 associates worldwide covering MEMS, Compound Semiconductors, LED, Image Sensors, Optoelectronics, Microfluidics & Medical, Photovoltaics, Advanced Packaging, Manufacturing, Nanomaterials and Power Electronics. The group supports industrial companies, investors and R&D organizations worldwide to help them understand markets and follow technology trends to develop their business.

Contact Information

Yole Développement


http://www.yole.fr/

Share and Enjoy:
  • Digg
  • Sphinn
  • del.icio.us
  • Facebook
  • Mixx
  • Google
  • TwitThis

Tags: