Videos / Podcasts
June - 2013
- Innovating with Statistical Analysis
In our first interview at the Design Automation Conference in Austin, Texas, John Blyler talks with Zhihong Lu of Proplus (http://www.proplussolutions.com/en/contact/) about the problems and potential of innovation in chip design through statistical analysis.
- RTL Signoff turns competitive
In our fourth interview this week at the Design Automation Conference in Austin, Texas, EiC John Blyler of Chip Design talks with Mike Gianfagna, Vice President of Corporate Marketing at Atrenta, about the growing competition and advances in RTL Signoff.
May - 2013
- Software Defined Radio Modules Take Advantage of Virtex-7 FPGAs
Pentek's Rodger Hosking talks with Technology Editor Bill Wong about how this platform takes advantage of Xilinx's latest Virtex-7 FPGA.
- Zilog at DESIGN West 2013 Silicon Valley
Zilogâs participation in the global electronics industryâs leading gathering for the design engineering community was a great success. With Zilogâs cutting edge product demonstrations, DESIGN West was the ideal venue to showcase their world-class products. Take a look at Steve Darrough, Zilogâs VP of Sales & Marketing, being interviewed about Zilogâs dynamic demonstrations.
- Digital Audio and Voice with PIC32 from Microchip Technology
Business Development Manager, Kevin Belnap demonstrates the latest platforms for digital audio. These platforms are perfect for those developing Smartphone / Portable Music Player docks or audio mixing solutions.
- GhostBridge Wireless Ethernet Demonstration
An introduction to B&B Electronics' newest, easy to use wireless Ethernet bridge. The GhostBridge creates a transparent, secure, high-speed (up to 150Mbps), point-to-point link between two remote devices or networks. The GhostBridge is sold in pre-configured pairs with PoE pass-through Ethernet ports to connect local devices like IP cameras. It is ready to go right out of the box, and requires no further configuration or software setup.
April - 2013
- ARM Development Studio 5 (DS-5)
This 5 minute tour introduces the new features in ARM DS-5 version 5.14 including ARM big.LITTLE processing support, improved compiler, multi-core debugger and trace synchronization, power and temperature monitoring and much more...
- Embedded Energy Using EnerChip Bare Die
EnerChip smart solid state batteries are made using semiconductor process on silicon wafers. EnerChips can be used in bare die form and co-packaged with other integrated circuits in a single package. This Embedded Energy configuration means energy storage can be integrated into devices where legacy batteries and super capacitors cannot be used.
- Introduction to the MTS2916A Evaluation Board
http://mchp.us/HBJCgN This video demonstrates Microchip's MTS2916A stepper motor driver that is managed by a PIC microcontroller for driving one bipolar stepper motor or two brushed DC motors.
- Introducing the MCP19111
http://mchp.us/11p6PO1 Introducing the MCP19111 - Microchip's first Digitally-Enhanced Power Analog Product
- 8-bit USB PIC Microcontrollers with Active Clock Tuning
Microchip Technology expands its Full-Speed USB 2.0 Device PICÂ® microcontroller portfolio with three new Enhanced Midrange 8-bit families comprising 15 scalable MCUs ranging from 14 to 100 pins with up to 128 KB of Flash. All feature internal clock sources with the 0.25% clock accuracy necessary for USB communication, which saves up to $0.15 by eliminating the need for an external crystal. Additionally, all three families are eXtreme Low Power compliant, with power consumption down to 35 ÂµA/MHz Active and 20 nA in Sleep mode.
- Save More 8-bit
http://mchp.us/FO7AqF http://mchp.us/FOc11F Save More Power, Space, Money, and Time with Microchip! Explore Microchip's wide range of innovative 8-bit products with eXtreme Low Power consumption and unique peripherals, which enable you to reduce your board space, component count, and time-to-market.
March - 2013
- CompTIA Research 2013: Machine-To-Machine (M2M)
Machine-to-machine (M2M) systems are growing in popularity as companies seek to gather new forms of data. Tim Herbert and Seth Robinson take a look at this nascent area of technology.
- Power Energy Harvesting Development
- Numerically Controlled Oscillator from Microchip Technology
The Numerically Controlled Oscillator (NCO) module is a timer that uses the overflow from the addition of an increment value to divide a frequency. The advantage of the addition method over simple counter driven timer or a PWM is that the resolution of division does not vary with the divider value resulting in true linear frequency control. The NCO is most useful for applications that require linear frequency control, high frequency accuracy and fine resolution at a fixed duty cycle, e.g., Lighting and Ballast Control, Tone Generators and Resonant Power Supplies.
- Microchip's Save More 8-bit Presentation
Save More Power, Space, Money, and Time with Microchip! Explore Microchip's wide range of innovative 8-bit products with eXtreme Low Power consumption and unique peripherals, which enable you to reduce your board space, component count, and time-to-market.
- Complementary Waveform Generator (CWG) from Microchip
Provides a complementary waveform from various inputs sources including the PWM, Configurable Logic Cell (CLC), Numerically Controlled Oscillator (NCO) and comparators. It has independent rising and falling dead-band control with auto-shutdown/restart capability that provides improved switching efficiencies for applications such as synchronous power supplies and motor control.
- XLP 8-bit Development Board Overview
This video demonstrates Microchip's new XLP 8-bit Development Board.
- BodyCom™ Technology
http://mchp.us/WtdcyC Introduction to BodyCom Technology utilizing the BodyCom Development Kit demonstration.
- PIC16F1512 & PIC16F1513 MCUs Overview
http://mchp.us/FOc11F PIC16F1512/13 MCUs combine eXtreme low-power technology and high digital & analog peripheral integration for use in a wide variety of applications.
February - 2013
- ARM Development Studio 5 Customizing Streamline Performance chart version 5.11
This video walks you through the functionality of the newest feature of ARM Streamline - chart configuration.
- InfiniBand's The Rage in Small, Deployable HPEC
The SWaP-C trend continues unabated as ever more C4ISR, SIGINT, SDR and radar/sonar processing applications demand TeraFLOP computing in rugged, compact systems.
January - 2013
- Multicore debug of Freescale™ Vybrid Controllers via USB with ARM® DS-5™
ARM-based platforms come in a range of processor configurations, and these platforms often have more than one ARM processor. Traditionally these have been Symmetric Multi Processing (SMP) systems, where a cluster of identical CPUs work together co-operatively.
December - 2012
- Analyst 3D FEM EM Solver - Multilayer Via Transition
Dr. Jaakko Juntunen shows how shape modifiers can be utilized in Analyst to create a parameterized EM problem. Moreover, when the model is used in circuit design, the EM results are interpolated, enabling an incredibly fast yield analysis and optimization with the full EM accuracy.
November - 2012
- GigOptix-40G DQPSK Demonstration
GigOptix demonstrates 40G DQPSK with revolutionary TFPS polymer modulator
September - 2012
- Cost-Effective Millimeter Signal Analysis Approaches | Agilent Technologies
This video was provided by IEEE.tv's coverage of IMS 2012 in Montreal. Material was created by Ben Zarlingo and presented by Bruce Erickson of Agilent Technologies. http://www.agilent.com/find/sa
- SDC Management and Verification: What's Missing?
Sarath Kirihennedige, Sr. Manager Product Engineering at Real Intent, speaks with Graham Bell about how design constraints (SDC) are currently developed, what are the problems with the current approach and what a complete Constraints management and verification solutions looks like.
- John Blyler Interview on ChipEstimate.TV
Sean O'Kane, Producer/Host ChipEstimate.TV interviews: John Blyler, Editor-in-Chief, Chip Design
- Synopsys Discusses its New DDR4 Memory Interface IP
Sean O'Kane from ChipEstimate.com interviews Navraj Nandra about the Synopsys' DesignWare DDR4 IP product release. They discuss DDR4 SDRAM, its market, and their predictions for DRAM.
Navraj Nandra, Synopsys and Sean O'Kane, ChipEstimate.com
August - 2012
- IMS 2012 Keynote on Integrating Design and Test
Dr. Mark Pierpoint delivers the IMS2012 MicroApps Keynote address: As global competition increases, the need to produce the next state-of-the-art product faster has driven changes in how EDA and test instrumentation work together. Gone are the days when a design could be thrown over the wall to production. The next generation of communications protocols have barely been labeled "standards" when products using them have hit the streets. To produce better communications products faster requires that the line between EDA and test be blurred and new synergies between them created...