Elma’s New 3U VPX Virtex-6 FPGA Processing Board Includes VITA 57 FMC Front-end for Flexible I/O



Board allows multiple FPGAs to be very tightly coupled via point-to-point or mesh topologies

FREMONT, Calif., July 21, 2011 — /PRNewswire/ — The Systems division of Elma Electronic Inc., a leading supplier of chassis, embedded products, and system solutions, now offers the TIC-FEP-VPX3b, an FPGA-based 3U VPX front-end processing board that provides an FMC site coupled to a large capacity Virtex-6 FPGA for extremely flexible I/O.

(Photo: http://photos.prnewswire.com/prnh/20110721/PH39316 )

Designed for digital signal processing (DSP), the versatile TIC-FEP-VPX3b is ideal for applications such as RADAR, sonar, electronic warfare, imaging and communications. The new board offers high performance logic, increased SerDes based I/O and powerful DSP slice resources that help meet higher bandwidth and performance demands, while utilizing up to 25% less power.

Supported by low power and high speed GTX transceivers at rates up to 6.5 Gbps, the board enables the application of interfaces used in today’s embedded systems. On-board PCIe Gen 1 and Gen 2 protocols, via a hard IP block and Ethernet MAC blocks, allow PCIe x4 and GbE interfaces to be implemented from the FPGA to form data and control planes respectively.

Built to the VPX specifications, the TIC-FEP-VPX3b includes four 4-lane fabric ports on the P1, connected by GTX transceivers to the main FPGA. The four fat pipe channels provide the PCIe x4 and GbE interfaces as well as two x4 expansion ports.

Featuring an on-board Xilinx Virtex-6 FPGA, the board comes with two banks of 40-bit 1.25 GB DDR3 memory with transfer rates of 7.5 Gbps and a Spartan-6 control node, used to load logic images into the main FPGA. The Spartan-6 control node enables ‘on the fly’ bitstream management for dynamic FPGA configuration. Other resources include zero bus turnaround (ZBT) SRAM with a throughput of 400 MB/sec for expedited read/write processing.

The GTX transceivers can be grouped to form multi-lane Aurora pipes supporting inter-VPX card connection, allowing the FPGA processor boards to be very tightly coupled via point-to-point or mesh topology. The board fits scalable architectures, where more than one FPGA processor is required.

Elma’s supporting 3U VPX-300 Reference Development Platform utilizes a backplane architecture (BKP3-CEN09-15.2.17-n) designed specifically for FPGA interconnects. This front-end/back-end topology is part of the VITA 65 OpenVPX specification. In addition to the topology, the RDP provides the 3U VPX FPGA processor and other products compatible with the TIC-FEP-VPX3b FPGA board such as VPX SBCs, control and data plane switches as well as storage modules.

The TIC-FEP-VPX3b is compatible with Xilinx development tools including ISE Design Suite and Platform Cable. The new board supports VxWorks and Linux as standard, with the ability to implement the user’s existing source code or third party IP cores.

The board comes in three environmental grades: standard, rugged and conduction-cooled.

Pricing for the TIC-FEP-VPX3b depends on the choice of Xilinx FPGAs and environmental grade. The board is currently shipping.

For more information, please visit Elma’s Embedded Computing Products site, contact sales at sales@elmasystems.com, or call (510) 656-3400.

For high res download and full text: http://www.simongroup.com/PressRoom/press-release.php?Job=ESP-A-8236

For more news releases: http://www.simongroup.com/PressRoom/act.php

Subscribe to our RSS feed: http://feeds.feedburner.com/PressRoom-ActTechnico

Follow us on Twitter: Elma_Electronic: http://twitter.com/Elma_Electronic

Become a fan: Elma Electronic: http://www.facebook.com/ElmaElectronic

Follow us on LinkedIn: Elma Electronic Inc.: http://www.linkedin.com/company/elma-electronic-inc.

Upcoming Elma Tradeshows: http://elmasystems.com/new_site/news_events.htm

READER SERVICE INQUIRIES: Sales Department; Elma Electronic Inc.; (510) 656-3400; sales@elma.com.

About Elma Electronic:

The Systems division of Elma Electronic Inc. supplies the widest range of commercial, COTS and rugged electronics packaging as well as a full complement of embedded computing products and services for an extensive variety of applications.

Elma’s focus is to leverage proven technology based on VITA and PICMG standard architectures (i.e. VME, OpenVPX, CPCI, ATCA and MicroTCA). With the acquisition of ACT/Technico in January 2009, Elma became a leading supplier of open-standards embedded boards and integrated sub-systems. Elma’s Embedded Computing Products and Services, including single board computers, mass storage, RAID, I/O and networking solutions, RTOS, Linux/Windows and device drivers are sold under the brand name of ACT/Technico.

Elma Electronic manages entire projects from initial system architecture to specification, design, manufacturing and test through its worldwide production facilities and sales offices. The company serves the mil/aero, industrial, research, telecom, medical and commercial markets and is certified to ISO 9001.

Editorial Contact:The Simon Group, Inc.Beth Smith or Christina SanchezPhone: (215) 453-8700E-mail: publicrelations@simongroup.com
SOURCE Elma Electronic Inc.

Contact Information

Elma Electronic Inc.

44350 S. Grimmer Blvd.
Fremont, CA, 94538
United States

tele: 510-565-3400
fax: 510-656-3783
sales@elma.com
www.elma.com

Share and Enjoy:
  • Digg
  • Sphinn
  • del.icio.us
  • Facebook
  • Mixx
  • Google
  • TwitThis