Windows® Embedded »

EMAC, Inc.

PPC-E7

Supported Microsoft Platforms: Windows Embedded CE
Supported Processors: ARM

The PPC-E7 is a compact Panel PC with a 7” WVGA (800 x 480) TFT color LCD and a resistive touch screen. Unlike other compact Panel PCs, the PPC-E7 comes with either Windows CE 6.0 or Linux fully configured and installed on flash disk. This allows the software engineer to concentrate on writing applications and not have to worry about configuration and setup. Just apply power and watch the Windows CE User Interface appear on the vivid color LCD. Interact with the PPC-E7 using the responsive, integrated touchscreen.

The PPC-E7 compact Panel PC has an embedded ARM 9, 200Mhz Processor. This Panel PC supports up to 128MB of SDRAM, 64 MB of Flash, and 128K bytes of serial flash. In addition, a MMC/SD card socket is provided for additional Flash storage. The PPC-E7 can be connected to a network using the 10/100 Base-T Ethernet controller and it’s onboard RJ-45 connector. The PPC-E7 offers two RS232 serial ports and one RS232/422/485 port with Auto RS485. Also provided are three USB 2.0 host ports, an I2S Audio port with Line In/Out and a battery backed clock.

When developing CE 6.0 applications for the PPC-E7, Microsoft Visual Studio 2005/2008 can be utilized. Visual Studio provides everything the user needs for developing PPC-E7 applications. All the compiling, converting, downloading and debugging inherent to software development can be done from one easy to use high level interface. EMAC provides an SDK for the PPC-E7, which contains source examples and drivers.

The PPC-E7 starts at $495.00 USD per unit. For more information on the PPC-E7 go to: http://www.emacinc.com/panel_pc/ppc_e7.htm

FEATURES & BENEFITS

Low Power Fanless Design
12 Vdc to 28 Vdc Supply Voltage
Inexpensive Open-Frame Design
Software Controlled LCD Backlight
Develop Software using Visual Studio

pg_18a

TECHNICAL SPECS

200Mhz ARM9 Fanless processor with Math Coprocessor and Video Accelerator
WVGA 800×480 Color TFT LCD with Touch and Wireless 802.11 option
3 USB 2.0, 10/100 BaseT Ethernet, 3 serial RS232/422/485 and Audio I/O Port
Up to 128MB of RAM, 64MB of Flash and SD Flash Socket
A/D, Timers, PWM, SPI and GPIO

DEVICE FOCUS

Control/Automation, Gaming/Gambling, Industrial Controllers, In-Vehicle Telematics/Infotainment, Portable Data Terminals, Test & Measurement Equipment

VERTICAL MARKETS

Building/Home Automation, Consumer Electronics, Industrial Control/Automation, Internet Appliances, Test & Measurement

AVAILABILITY

Now

Contact Information

EMAC, Inc.

2390 EMAC Way
Carbondale, IL, 62902
USA

tele: 618.529.4525
fax: 618.457.0110
info@emacinc.com
www.emacinc.com

Share and Enjoy:

This entry was posted on Monday, September 21st, 2009 at 9:25 am and is filed under CPU Boards, Datasheet.

Featured White Papers

Advantech’s Secure & Unified Smart Interface

Advantech’s SUSI (Secure & Unified Smart Interface) provides a set of user-friendly, intelligent and integrated interfaces, which speeds development, enhances security and offers add-on value for Advantech platforms. SUSI plays the role of catalyst between developer and solution, and makes Advantech embedded platforms easier and simpler to adopt and operate with customers’ applications.

Implementing ATCA Serving Gateways for LTE Networks

One key challenge of LTE is how core network components will keep up with massive increases in access link throughput (e.g., seven times HSPA data rates). How evolved core network equipment manufacturers rise to this challenge will be critical for determining subscriber satisfaction with their LTE service experiences. To focus on the challenge, this article discusses the “best practices” approach for building an ATCA Serving Gateway node, the very backbone of the LTE network user plane.